ICP DAS CAN converters are used to establish a physical coupling of two or more communication interface, and are infrastructure components with which complex network structures can be implemented. They can be used to implement the data conversion between CAN and COM, USB or Ethernet interface. By selecting the necessary CAN converters, users can control and integrate the data exchange and transmission between multi-interfaces easily.

ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3000 series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3000 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 300 A). It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. You can use CT's that you currently own with PM-3133P (without CTs) Power Meter. The CT inputs of the PM-3133P can handle a maximum of 333mV of AC current.

Feature

• True RMS Power Measurements
• Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
• Current Measurements Up to 300 A with Different CT Ratio
• Voltage Measurements Up to 500 V
• Clip-on CT for Easy Installation
• W Accuracy Better than 0.5% (PF=1)
• Supports RS-485, Ethernet (PoE) or CANopen Interface
• Supports Modbus RTU, Modbus TCP or CANopen Protocol
• Supports 2 Power Relay Output (Form A)
• Total Harmonic Distortion (THD)
• IEC 61010-1and EN 61010-1

The CAN-Logger series devices (CAN-Logger100 / CAN-Logger200) are high-performance intelligent CAN bus data logger device with one/two CAN port that can help to make data collection and to process on a CAN bus network easier and quicker. The powerful CPU of the CAN-Logger devices provide the accurately time-stamp for each CAN message and supports storage media like SD or SDHC type flash for saving these CAN messages that is useful to analysis and diagnostic the CAN Bus network. In order to enhance the portability of the CAN-Logger200, this module is powered by the USB interface or M12 connectors of CAN bus interface. The CAN-Logger devices use the standard USB HID driver of the Windows system.

Feature

• Compatible with CAN specification 2.0 parts A and B
• 2500 Vrms photocoupler isolation on the CAN side
• Full compatible with the ISO 11898-2 standard
• Supports CAN bus acceptance filter configuration
• Max. CAN data flow for a single channel is 20000 fps
• Programmable CAN bus baud rate from 10 kbps ~ 1Mbps
• USB 2.0 High Speed Compatibility
• Supports 4 to 32 GB SDHC type flash for saving CAN messages
• Built-in jumper for the 120 Ω terminal resistor of the CAN side
• Power by the USB port or CAN port
• 3 kV galvanic isolation for the CAN port
• Provides a configuration utility that can be used to transmit/receive CAN messages