-
- home > news > products > 2018
-
New Product Release: I-9114i/I-9144i Multi serial Modules
Applied on the XP-9000, WP-9000, LP-9000 and LX-9000 PACs
Dec. 26, 2018 - Comparison Table:
Item RS-232 RS-422/RS-485 Isolation Connector I-9114i 4 - 2500 Vrms DB-37 I-9144i - 4 2500 Vrms 20-Pin Terminal Block -
I-9114i/9144i module is provided functions for installation of the RS-232/422/485communication module driver on the WP-9000, XP-9000, LX-9000 or LP-9000 programmable automation controllers (PACs).
The I-9114i provides 4 isolated RS-232 serial ports and The I-9144i provides 4 isolated RS-422/485 serial ports. They are equipped with a 128-byte hardware FIFO for each port and offers speeds up to 115.2 kbps with support for RS-232/422 full-duplex communication.
In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-9114i/9144i from permanent damage.
The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-232/422/485 port.
For more information, please refer to the product websites:
http://www.icpdas.com/root/product/solutions/remote_io/i-9k_i-97k/i-9k_i-97k_communication.html -
ICP DAS also provides the I-9114i/9144i install steps.For XP-9000-WES7 controller
Refer to 4.1.4. Multi-serial Port Module at
http://ftp.icpdas.com/pub/cd/ippc-wes7/document/user_manual/xp-9000-wes7_user_manual_en_v1.1.1.pdf#page=69
For WP-9000-CE7 controller
http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/faq/general_io_expansion/w1-007-01_how_to_label_serial_ports_on_i-8112_
i-8114_i-8142_i-8144_with_COMx_en.pdf
Note: The I-9114i/9144i software install steps are the same with the I-8114iw/8144iw.
For LX-9000 controller
Rerfer to 6.1 N-Port Modules Support at
http://ftp.icpdas.com/pub/cd/linpac/napdos/lx-series/user_manual/user_manual_lx-series.pdf#page=99
For LP-9000 controller
Refer to 9.1 Support for N-Port Modules (I-9114, I-9144, etc.) at
http://ftp.icpdas.com/pub/cd/linpac/napdos/lp-9x2x/user_manual/lp-9x21_user_manual_v1.3.pdf#page=217