| |
|
|
| |
~NEW~ |
|
| |
| |
 |
Model: USB-87P1 |
| |
|
| |
 |
Model: USB-87P4 |
| |
|
| |
 |
Model: USB-87P2 |
| |
|
| |
 |
Model: USB-87P8 |
| |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
| |
|
|
| |
|
Interface Type :Full speed with USB 1.1 specifications |
| Cable |
USB type A connector |
| Baud rate |
115200 bps Default |
| Isolation |
3000 VDC |
| ESD Protection |
+/- 4K Contact Discharge and +/- 8K Air Discharge |
| DIP Switch |
1 bit *1, For auto configuration |
| Power |
Yes |
| System Ready |
Yes |
| Auto configuration |
Yes |
| Slot Status |
Yes |
| Hot Swap |
Yes |
| Auto Configuration |
Yes |
| Support Module Type |
High profile I-87K module only |
| |
Slots |
| USB-87P1 |
1 |
| USB-87P2 |
2 |
| USB-87P4 |
4 |
| USB-87P8 |
8 |
| USB-87P1 |
64mm x 117mm x 110mm |
| USB-87P2 |
95mm x 132mm x 111mm |
| USB-87P4 |
188mm x 132mm x 111mm |
| USB-87P8 |
312mm x 132mm x 111mm |
| Power |
| Input Range |
10~30 VDC (non-regulated) |
| Reverse polarity protection |
Yes |
| Isolation |
1000 VDC |
| Frame Ground |
Yes |
| |
Consumption |
Power Board Driving |
| USB-87P1 |
1 W |
5 W |
| USB-87P2 |
1 W |
8 W |
| USB-87P4 |
2 W |
15 W |
| USB-87P8 |
2.4 W |
30 W |
| Environment |
| Operating Temperature |
-25
to +75 ¢XC |
| Storage Temperature |
-30
to +75 ¢XC |
| Humidity |
5
~ 95%, Non-condensing |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
| USB-87P1-G CR |
1 slots I/O expansion unit (Gray Cover) (RoHS) |
| USB-87P2-G CR |
2 slots I/O expansion unit (Gray Cover) (RoHS) |
| USB-87P4-G CR |
4 slots I/O expansion unit (Gray Cover) (RoHS) |
| USB-87P8-G CR |
8 slots I/O expansion unit (Gray Cover) (RoHS) |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
