Model: NS-208PSE Model: NSM-208PSE
NS-208PSE
Unmanaged 8-Port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch

NSM-208PSE
Unmanaged 8-Port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch; Metal Casing
 
         
     
 
 
 
The NS-208PSE/NSM-208PSE is an 8-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch, it supports 8 PoE ports which are classified as power source equipments (PSE).The NS-208PSE/NSM-208PSE makes centralized power supply come true and provides up to 15.4 watts of power per port. The NS-208PSE/NSM-208PSE can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
 
   
     
 
 
 
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 8 PoE ports with Power Sourcing Equipment (PSE) operation
  • Auto-detection of PD (powered devices) and automatic power management
  • Over-temperature, over-current and over/under-voltage detection
  • Operating temperatures,¡V40 ~ +75¢XC
  • DIN-Rail
  • "-R" stands for products with conformal coating protection
 
   
     
 
 
 
Models NS-208PSE NSM-208PSE
Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward, wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act , Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
+/-6 kV ESD Protection Yes
Power Input
Input Voltage Range +46 ~ +55 VDC for PoE output
Power Consumption 0.1 A@ 48 VDC without PD loading; 2.8 A@ 48 VDC with PD full loading
Protection Power reverse polarity protection
+/-6 kV ESD Protection Yes
Connection 3-Pin Removable Terminal Block
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment)
PoE Voltage +46 ~ +55 VDC depending on power input
PoE Power Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode DC disconnect
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP30 Protection)
Dimensions (W x L x H) 31 mm x 157 mm x 113 mm 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Environmental
Operating Temperature -40 ¢XC ~ +75 ¢XC
Storage Temperature -40 ¢XC ~ +85 ¢XC
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
 
   
     
 
 
 
NS-208PSE CR Unmanaged 8-Port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch (RoHS)
NS-208PSE-R CR NS-208PSE with Conformal coating protection
NSM-208PSE CR Unmanaged 8-Port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch; Metal Casing (RoHS)
NSM-208PSE-R CR NSM-208PSE with Cconformal coating protection
 
   
     
 
 
 
DR-120-48    48 V/2.5 A, 120 W Power Supply with DIN-Rail Mounting
MDR-60-48    48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F-48    48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting
KA52F-48    48 V/0.52 A, 25 W Power Supply without DIN-Rail Mounting
 
   
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved