Model: I-87017DW
8-channel Differential/16-channel Single-Ended Analog Input Module with High Voltage Protection


I-87017DW is a serial interface and 8-channel Differential/16-channel Single-Ended analog input module. The analog input range is software selectable and supports +/-10V, +/-5V, +/-1V, +/-500mV, +/-150mV, and +/-20mA. Differential and Single-ended mode is selected by jumpers.
  • 8-channel Differential/16-channel Single-ended Analog Input
  • D-Sub 37 Connector
  • 4 kV ESD Protection
  • Dual Watchdog
  • 3000 VDC Intra-Module Isolation, Field to Logic
  • A Wide Range of Operating Temperature: -25 XC~ 75 XC
  • RoHS Compliance
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis
  • Testing Equipment.
Analog Input
Input Channels 8 Differential/16 Single-Ended
Input Type +/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV,
+4 ~ +20 mA , 0 ~ +20 mA, -20 mA ~ +20 mA(Only Differential Mode, Requires Optional External 125 Ohm Resistor)
Resolution 16-bit/12-bit
Sampling Rate Normal Mode: 16-bit,10 Samples/Sec. (Total)
Fast Mode: 12-bit, 60 Sample/Sec. (Total)
Accuracy Normal Mode :+/- 0.1% of FSR
Fast Mode :+/- 0.5% of FSR
-3dB Band Width 15.7Hz
Zero Drift +/- 20 gV/ XC
Span Drift +/- 25 ppm/ XC
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance Differential Mode: >2M Ohms, Single-ended Mode: >1M Ohms
Overvoltage Protection Differential Mode: 240 Vrms, Single-ended Mode: >120 Vrms
ESD Protection 4 kV Contact for each terminal.
Open Daughter-Board Detection Yes
Individual Channel Configuration Yes
Connector DB37
Intra-module Isolation, Field to Logic 3000 VDC
Dual Watchdog Yes, Module(1.6 sec) and Communication(Programable)
LED Display
1 LED as Power/Communication Indicator
Power Consumption Maximum: 1.4W
Operating Temperature -25 ~ +75 XC
Storage Temperature -30 ~ +80 XC
Humidity 10 ~ 90% RH, non-condensing
30 mm x 102 mm x 115 mm(W x L x H) Detail
I-87017DW-G CR    8-channel Analog Input Module (Gray Cover) (RoHS)
DN-37-A    I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:5.08mm)
DN-37-381-A    I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:3.81mm)
CA-3705A    Male-Female D-sub cable 0.5 M
CA-3710A    Male-Female D-sub cable 1 M
CA-3715A    Male-Female D-sub cable 1.5 M
Converters    USB, RS-232, Fiber Optical to RS-485 Converters and Repeaters
Power Supply    24 VDC power supply
Relay Module    External relay modules for I-7000 DO module
Learning Kit    Beginner learning kit
Application Books    Application books designed with our products
Data Logger Software    User friendly data logger software (free)
Copyright© ICP DAS Co., Ltd. All Rights Reserved