Model: I-7188EF-016 Model: I-7188EFD-016
I-7188EF-016/
I-7188EFD-016

Embedded Ethernet / Internet Controller
   
   
 
 
 
The I-7188EF-016 is an μPAC with isolated FRnet, Ethernet, RS-485 and RS-232 ports. I-7188EF-016 is designed to make that the Host PC easily access the FRnet I/O module via Ethernet. I-7188EF-016 controls the distributed FR-2000 and FR I/O module via FRnet, and provides the Modbus and DCON protocol for HOST PC to access these FR I/O channels via Ethernet.
The I-7188EF controls distributed FR-2000 and FR I/O modules via FRnet. Each I- 7188EF can control a maximum of with 16 groups, each group having a maximum of 16 I/O channels. In other words, each I- 7188EF-016 can control a maximum of 128 digital input channels and 128 digital output.
MiniOS7 is pre-installed on I-7188EFand is ready to run your C software programs. In addition to being used as a converter, I-7188EF-016 series can also be programmed as an autonomous controller to control distributed FR-2000 I/O modules via FRnet.
Advantages of μPAC-based Control System

Compared to PC-based and PAC-based FRnet control system, the μPAC I-7188EF, is much smaller and cheaper. AS a result of the special features of FRnet, such as real I/O synchronization and fixed scan time, the I-7188EF includes PLClike control functions. Because FRnet is so easy to program, users need only take a few minutes to learn FRnet I/O programming.

The I-7188EF has an Ethernet port, meaning that all FRnet products can be controlled via an intranet or Internet. It also has an additional RS-485 port to control our I-7000 data acquisition modules. Using the I-7188EF, thousands of I/O control system channels can be easily implemented. the optional extended flash memory of I-7188EF can record all I/O status events for a greater length of.

The I-7188EF can operate in a wide temperature range and in harsh industrial environment. Compared to PLCs, traditional the I-7188EF has better network capabilities, strong distributed and high-speed deterministic I/O (FR series I/O), cheaper analog I/O modules, cheaper motion control modules, and richer software tools.

 
   
   
 
 
 
FRnet Network
FRnet is an innovative industrial field bus that the many special features, such as
  • High speed deterministic I/O control
  • Real I/O synchronization capability
  • Non-protocol communication
  • Easy used memory-mapping I/O programming
  • One FRnet port to expand distributed I/O module
  • Two wire cabling
  • Modbus Protocol
  • FRnet I/O mapping to Modbus addresses for Modbus/TCP client access
  • Converts single Modbus/TCP to multi Modbus/RT
  • I-7188EF-016 acts in a similar and way to the I-7188E-MTCP Modbus/TCP gateway. It can easily upgrade many Modbus/RTU devices connected to the COM ports of I-7188EF-016 to give Ethernet communication abilities.

    ASCII-based Protocol (DCON Protocol)
    I-7188EF-016 includes the DCON protocol, which is a request/reply communication protocol that is used to access the data from the module using a simple ASCII format. For example, sending the command "$ 01M " will query the controller name. The responding module will reply with a message similar to "!017188EF-016(cr)".
    Various DCON SDK Provided (Free)
    In order to access the FRnet I/O of the I-7188EF-016 from the host and the remote I/O modules connected to the I-7188EF-016. Various SDKs have been provided on the CD, such as:
  • DLL driver
  • ActiveX component
  • LabView bundled driver
  • Indusoft bundled driver
  • Linux driver
  • OPC server
  • Firmware Modifiable
    The Modbus and the other related SDK is provided for users to develop their own custom firmware.
    Built-in Watchdog
    The built-in watchdog circuit will reset the CPU module if a failure occurs in either the hardware or the software. If the application program does not refresh the watchdog timer within 0.8 sec, the watchdog circuit will initiate a reset of the CPU.
     
       
         
     
     
    System
    CPU 80188-40 or compatible
    EEPROM
  • 2048 bytes (8 blocks, each block contains 256 bytes)
  • Data retention > 100 years
  • 1,000,000 erase/write cycle
  • SRAM 512Kb
    FLASH ROM
  • 512Kb
  • Erase unit is one sector (64Kb)
  • 100,000 erase/write cycles
  • Programs can be download from COM1
    Built-in 64-bit hardware unique serial number
    Communication
    Ethernet Port 10M/10BaseT, RJ-45 Port
    COM Port
  • COM driver support interrupt 1K QUEUE Input Output buffer
  • COM1: RS232 (CTS, RTS, RXD, TXD, GND)
  • COM2: RS485 (Data+, Data-)
  • FRnet Port
  • Communication speed : 250Kbps
  • Scan time : 128 input / 128 output points @ 2.88 mS (I-7188EF-016L)
  • Communication distance : Max. 400m (I-7188EF-016L)
  • Cable: CPEV 0.9 (2P Twisted-pair wire)
  • Distributed I/O modules
         Max. 8 SA modules, FR-2053 (16 DI)
         Max. 8 RA modules, FR-2057 (16 DO)
  • Each module of FR-2053/FR2057 module is one group.
  • Built-in WatchDog Timer (0.8 seconds)
    Built-in Power Protection and Network Protection Circuit
    Real Time Clock
  • Year-2000 compliant
  • Displays seconds, minutes, hours, date of the month
  • Displays month and year from 1980 to 2079
  • NVSRAM: 31 bytes, battery backup, data valid for up to 10 years
  • Display
    7-segment LED: 5-digit (for I-7188EFD only)
    Power
    Power requirement 10 - 30 VDC(non-regulated)
    Power consumption 2.0W for I-7188EF-016
    3.0W for 7188EFD-016
    General Environment
    Operating temperature -25°C to +75°C
    Storage temperature -40°C to +80°C
    Humidity
  • Operating humidity: 10% ~90% RH, non-condensing
  • torage humidity : 5%~95% RH, non-condensing
  • Mechanical
    Dimensions ( W × H × D ) 123mm × 72mm × 33mm
    Installation DIN-Rail, Stack Mounting
     
       
         
     
     
  • Factory automation
  • Building automation
  • Energy management
  • Agriculture automation
  •  
       
       
     
     
     
    I-7188EF-016 FRnet £gPAC
    I-7188EFD-016 FRnet £gPAC with display
     
       
         
    Copyright© ICP DAS Co., Ltd. All Rights Reserved