| Models |
VP-2117 |
VP-2117-TC |
| System Software |
|
| OS |
MiniOS7 |
| Development Software |
|
ISaGRAF
Software |
ISaGRAF Ver. 3 |
IEC 61131-3 standard |
| Languages |
LD, ST, FBD, SFC, IL & FC |
| Max. Code Size |
64 KB |
| Scan Time |
2 ~ 25 ms for normal program
10 ~ 125 ms (or more) for complex or large program |
| CPU Module |
|
| CPU |
80186 or compatible (80 MHz and 16-bit) |
| SRAM |
768 KB |
| FLASH |
512 KB |
| 100,000 erase/write cycles; with Flash protection switch. |
| FLASH Disk |
64 MB NAND Flash |
| 100,000 erase/write cycles |
| Dual Battery Backup SRAM |
512 KB |
| Data Retention: 5 years. |
| EEPROM |
16 KB |
| 1,000,000 erase/write cycles; Data Retention: 40 years. |
| NVRAM |
31 bytes |
| Battery backup, data valid up to 5 years. |
| RTC (Real Time Clock) |
Provide second, minute, hour, date, day of week, month, year |
| 64-bit Hardware Serial Number |
Yes, for Software Copy Protection |
| Watchdog Timer |
Yes (0.8 second) |
| Communication Ports |
| Ethernet |
RJ-45*1, 10/100 Base-TX, (Auto-negotiating, LED indicators), program download port. |
| COM0 |
Internal communication with the I-87K High Profile modules in slot 0 ~ 2 |
| COM1 |
RS-232: TxD, RxD, GND, Speed: 115200 bps max. Program downloads port. |
| COM2 |
RS-485 |
D+, D- ; self-tuner ASIC inside. |
| Isolation |
2500 VDC |
| COM3 |
RS-232/RS-485
RS-232:TxD,RxD,GND,CTS,RTS ; RS-485: DATA+,DATA-,
Speed: 115200 bps max. Program downloads port. |
| MMI (Man Machine Interface) |
| LCD |
STN, 128 x 64 Dot Matrix LCD |
| Display Mode |
Text + Graphics |
| Text Font |
English + Simplified Chinese |
English + Traditional Chinese |
| Rubber Keypad |
24 keys |
| Buzzer |
Yes |
| LED Indicators |
3 Dual-Color LEDs (PWR, RUN, LAN1, L1, L2, L3; L1 ~ L3 for User Programmable) |
| I/O Expansion Slots |
|
| Slot Number |
VP-2117: 3 slots (slot 0 ~ slot 2) |
| * For High Profile I-8K and I-87K I/O Modules Only |
| Hot Swap |
* For High Profile I-87K I/O Modules in slot 0 ~ 2 Only |
| Mechanical |
|
| Dimensions (W x L x H) |
182 mm x 158 mm x 125 mm |
| Installation |
Panel Mounting |
| Ingress Protection |
Front panel: IP65 |
| Environmental |
|
| Operating Temperature |
-15 ~
+55 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Ambient Relative Humidity |
5 ~ 90 % RH (non-condensing) |
| Power |
|
| Input Range |
+10 ~ +30 VDC |
| Isolation |
1 kV |
| Capacity |
3 A, 5 V supply to I/O expansion slots |
| Power Consumption |
6 W (0.25 A @ 24 VDC) |
| Protocols (some protocols need optional devices) |
| NET ID |
1 ~ 255, user-assigned by software |
| Modbus RTU/ASCII Master |
Max. 2 COM Ports: COM1 ~ COM3 and COM5. (*) (To connect to other Modbus Slave devices.)
Max. Modbus_xxx Function Block amount for 2 ports: 128. |
Modbus RTU Slave
|
Max. 2 COM Ports: COM1 and one of COM2 or COM3. (For connecting ISaGRAF, PC/HMI/OPC Server & MMI panels.) |
| Modbus TCP/IP Slave |
Max. 6 connections. For connecting ISaGRAF & PC/HMI. |
| User-defined Protocol |
COM1 ~ COM3, COM5 ~ COM16 (*) by serial communication function blocks. |
| Remote I/O |
One of COM2, 3 supports I-7000 I/O modules & (I-87Kn or RU-87Pn + I-87K High Profile I/O boards) as Remote I/O. Max. 64 Remote I/O module for one PAC. |
| Fbus |
Built-in COM3 Port to exchange data between ICP DAS's ISaGRAF PACs. |
| Ebus |
To exchange data between ICP DAS's ISaGRAF Ethernet PACs via Ethernet port. |
SMS:
Short Message Service |
One of COM3 or COM5 (*) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone.
Optional GSM/GPRS modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) or visit to the web site for recommended GSM/GPRS modem.
http://www.icpdas.com/products/GSM_GPRS/wireless/GSM_GPRS_modem.htm
|
| CAN/CANopen |
Max. 3 COM Ports: COM1, 3 or COM5 ~ COM12 (*) can connect one I-7530 (RS-232 to CAN converter) to support CAN/CANopen devices and sensors.
One VP-2117 supports max. 3 RS-232 Ports to connect max. 3
I-7530.
Please refer to www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-086. |
| FRnet I/O |
Support Max. 3 I-8172W FRnet Master cards to connect FRnet I/O modules.
(Max. 768-ch. DI +
768-ch. DO) |
| Sending E-mail |
Actively or passively sending E-mail via Ethernet port through internet. Max.10 receivers for each sending and can send E-mail with an attached file. (Max. file size is about 488 KB) |
| Optional I/O Functions (Refer to ISaGRAF PAC I/O Selection Guide for I/O Module list) |
| PWM Output |
|
| High Speed PWM Module |
I-8088W:
8-ch PWM outputs, software support 1 Hz ~ 100 KHz (non-continuous), duty: 0.1 ~ 99.9% |
| DO Module as PWM |
8-ch. max. 500 Hz max. For Off=1 & On=1 ms .
Output square wave: Off: 1 ~ 32766 ms, On: 1 ~ 32766 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. (Relay Output boards cannot generate fast square wave) |
| Counter, Encoder, Frequency |
| Parallel DI Counter |
8-ch. max. For 1 controller. Counter val: 32-bit. 500 Hz max. Min. ON & OFF width must > 1 ms. Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W. |
| Serial DI Counter |
Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W. |
| Remote DI Counter |
All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535 |
| High Speed Counter |
I-87082W: 100 kHz max. 32 bit;
I-8084W: 250 kHz max. 32 bit |
| Encoder |
I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for
pulse/direction and cw/ccw input mode. (FAQ-112)
I-8084W: 250 kHz max., 4-ch encoder, can be pulse/direction, or Up/Down or A/B phase
(Quad. mode); Not support Encoder Z-index. (FAQ-100) |
| Frequency |
I-87082W: 2-ch, 1 Hz ~ 100 kHz;
I-87088W: 8-ch, 0.1 Hz ~ 500 kHz;
I-8084W: 8-ch, 1 Hz ~ 250 kHz; |
| Motion |
|
| Motion Control |
one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control. |
| * Note: COM5 ~ COM16 are resided at the expansion boards if they are plugged on slot 0 ~ 2 of VP-2117. |
MiniOS7 Embedded Operating System (DOS-like)
