|
| |
|
| |
~NEW~ |
| |
|
|
|
| |
|
|
| |
|
|
| |
|
PDS-220Fx 系列為可編程設備服務器，常被用來當作序列設備連網的途徑，將 RS-232/422/485 設備連結至光纖網路。光纖通訊能允許更長的傳輸距離，是因為信號低損耗與低串擾。且具有以下重要特點，使得光纖通訊在很大程度上取代原有銅軸電纜通訊方式。
- 抗電磁干擾：馬達、繼電器，和其他工業設備會產生大量的電子雜訊，在銅軸電纜上會引起嚴重的干擾問題。
- 對電訊號的阻抗高：在高電壓或處於不同地面電位間的環境也能安全運作。
- 高安全性：沒有電磁輻射、並且不易被竊聽。
- 無火花：處於易爆氣體的環境中是極優先的考量。
使用者可透過 VxComm Driver/Utility 友善的設定，透過簡單的幾個步驟，便可將 PDS-220Fx 內嵌的 COM Port 模擬成為電腦主機的標準 COM Port 。憑藉著獨立的協定、小而高效能的 OS 核心，PDS-220Fx 系列可輕易的應付任何現實中的網路應用需求。
PDS-220Fx 系列帶有強大且可靠的 Xserver 編程架構，讓使用者可快速的設計出屬於自己的網路應用程式。內嵌的高效能 MiniOS7 啟動 PDS-220Fx 只需1秒並且可以快速的給予回應。PDS-220Fx 搭載了1個 RS-232與1個 RS-422/485 通訊埠。至於模組上可拆卸的通訊埠連接頭是專為工業領域所設定的，能更方便於接線使用。 |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
- 整合序列設備透過光纖連網
- "Virtual COM" 延伸 COM ports
- Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7/8
- 強大的可編程設備服務器
- 適用於嚴苛環境的看門狗設計
- 反向電源極性保護
- 各序列埠皆有 +/-4 kV 靜電放電保護電路
- RS-485 port 帶有 Self-tuner ASIC自動切換收送方向
- 內嵌高效能的泓格 MiniOS7系統
- 100 Base-FX 網路控制器, SC/ST 連接埠
- 低耗電量 (約 3 Watt)
- 符合RoHS 環保規範
- 支援Modbus TCP 轉 RTU/ASCII Gateway 功能
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
| Models |
PDS-220FT |
PDS-220FC |
PDS-220FCS |
PDS-220FCS-60 |
| System |
| CPU |
80186-80 MHz or compatible |
| SRAM |
512 KB |
| Flash Memory |
Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles |
| Built-in Watchdog Timer |
Yes |
| LED Indicators |
Sys, Link/Act |
| NIT Pin |
Yes |
| Interface |
| Fiber Port |
100 Base-FX (ST connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
| Mode |
Multi mode fiber cables:
50/125, 62.5/125 or
100/140 μm
Wavelength : 1300 or 1310nm
Min. TX Output:- 20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm,
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm,
Min. RX Overload: -5 dBm
Budget: 19 dBm |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm,
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm,
Min. RX Overload: -5 dBm
Budget: 30 dBm |
| Distance |
2 km, (62.5/125 μm recommended) for full duplex |
30 Km, (9/125 μm recommended) for full duplex |
60 Km, (9/125 μm recommended) for full duplex |
| Serial Port |
| COM1 |
Male DB-9, 5-wire RS-232 (RxD, TxD, CTS, RTS, GND)
Note: +/- 4 kV ESD Protection |
| COM2 |
Removable Terminal Block,
2-wire RS-485 (D+, D-, GND) with Self-tuner ASIC
or 4-wire RS-422 (TxD+, TxD-, RxD+, RxD-, GND)
Note: +/- 4 kV ESD Protection |
| RS-485 |
Bias Resistor |
Yes, 1 KΩ |
| Node |
254 (max.) |
| COM Port Format |
| Data Bit |
7, 8 |
| Parity |
None, Even, Odd, Mark, Space |
| Stop Bit |
1.2 |
| UART |
16c550 or compatible |
| Baud Rate |
115200 bps Max. |
| LED Indicators |
| Link/Act |
Green |
| System |
Red |
| Power |
| Protection |
Power reverse polarity protection |
| Input Range |
+12 ~ +48 VDC (non-regulated) |
| Power Consumption |
0.14 A @ 24 VDC |
| Frame GND |
Yes (for EMS Protection) |
| Mechanism |
| Flammability |
Fire Retardant Materials (UL94-V0 Level) |
| Dimension (W x H x D) |
31 mm x 121 mm x 157 mm |
31 mm x 123 mm x 157 mm |
| Installation |
DIN-Rail mounting |
| Casing |
Fire Retardant Plastic |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +85 °C |
| Humidity |
10 ~ 90% RH, non-condensing |
| Fiber Port Connector |
ST |
SC |
| Pictures |
 |
 |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| Model |
CPU |
SRAM |
Flash |
Baud Rate |
Fiber Port |
Mode |
Distance |
COM1 |
COM2 |
| PDS-220FT |
80 MHz |
512 KB |
512 KB |
115200 bps Max. |
100 Base-FX,
ST connector |
Multi-Mode |
2 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FC |
100 Base-FX,
SC connector |
Multi-Mode |
2 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FCS |
100 Base-FX,
SC connector |
Single-Mode |
30 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FCS-60 |
100 Base-FX,
SC connector |
Single-Mode |
60 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| PDS-220FT CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Multi-mode ST Fiber Ports (RoHS) |
| PDS-220FC CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Multi-mode SC Fiber Ports (RoHS) |
| PDS-220FCS CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485 and 1 Single-mode SC Fiber Ports (RoHS) |
| PDS-220FCS-60 CR |
Programmable Device Server with Modbus Gateway, 1 RS-232, 1 RS-422/485, and 1 Single-mode SC Fiber Ports (RoHS) |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| GPSU06U-6 |
24 VDC/0.25 A, 6 W Power Supply |
| MDR-20-24 CR |
24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting |
| CA-0903 |
9-Pin Female D-sub and RS-232 connector cable, 30 cm Cable <Pin Assignment> |
| CA-0910 |
9-Pin Female D-sub and 3-wire RS-232 cable, 1 M Cable <Pin Assignment> |
| NS-200AFT CR |
Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi-mode ST connector (RoHS) |
| NS-200AFC CR |
Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi-mode SC connector (RoHS) |
| NS-200AFCS CR |
Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 single mode SC connector (RoHS) |
| NS-200AFCS-40T CR |
Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 (40 Km)single mode SC connector (RoHS) |
| NS-200AFT CR |
Industrial 10/100 Base-T to 100 Base-FX Media Converter (RoHS) |
| DIN-KA52F-48 |
48 VDC/0.52 A, 25 W Power Supply with Din-Rail Mounting |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
