| Technology |
| Standards |
IEEE802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
1.4 Gbps |
| Interface |
| RJ45 port |
10/100BaseT(X) auto negotiation speed, Full duplex mode,
and auto MDI/MDI-X connection |
| Fiber port |
100 Base-FX (SC/ST connectors) |
| LED Indicators |
10/100M, Link/Act, Full duplex(Fiber Port) |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Frame Ground for EMS Protection |
Yes |
Multi Mode
(NS-200AFT, NS-200AFT-T,
NS-200AFC, NS-200AFC-T ) |
Multi mode fiber cables:50/125, 62.5/125 or 100/140 £gm |
| Distance :2 km, (62.5/125 £g mrecommended)
for full duplex |
| Wavelength : 1300 or 1310nm |
| Min. TX Output:- 20 dBm |
| Max. TX Output: -14 dBm |
| RX Sensitivity: -34 to -31 dBm |
Single Mode
(NS-200AFCS, NS-200AFCS-T,
NS-200AFCS-40T) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125£gm |
| Distance: 15 km, (9/125 £gm recommended) for full duplex |
| Wavelength: 1300 or 1310nm |
| Min. TX Output: - 15 dBm |
| Max. TX Output: -8 dBm |
| RX Sensitivity: -36 to -31 dBm |
| Ethernet Transmission distance |
Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
| Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
| Power |
| Input Voltage Range |
+10 ~ +48 VDC (Non-isolation) |
| Power consumption |
0.12 A @ 24 VDC,
+/- 5% arrowed with 100M Full duplex |
| LED Indicator |
Yes |
| Protection |
Power reverse polarity protection |
| Frame Ground for EMS Protection |
Yes |
| Mechanical |
| Case |
Plastic (Flammability UL 94V-0) |
| Dimensions (W x H x D) |
33mm x 107mm x 85mm |
| Installation |
DIN rail mount |
| Environmental |
| Operating Temperature |
0¢XC ~ +70¢XC(-30¢XC ~ +75¢XC with T models) |
| Storage Temperature |
-30 ~ +85¢XC |
| Ambient Relative
Humidity |
10% ~ 90% RH, non-condensing |
