這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

home > product> solutions > pc based i/o board > Introduction > DIO-48
 
DIO-48
48-channel OPTO-22 DIO Board
 
 
Model: DIO-48
 
  • Connects directly to DB-24P,DB-24R,DB-24PR,DB-885B ,or any OPTO-22 compatible daughter board
  • 48 digital I/O lines
  • One 16-bit counter
  • IRQ Level : IRQ3 ~ IRQ15
  • Interrupt Trigger by Event / Timer / Port C3 , C7
  • Clock Source can be setting : RTC (32.768 k)/1 M/2 M/4 MHz
  • Emulate two industrial-standard 8255 mode 0
  • Two 50-pin flat cable connector
  • Output status read back
 
The DIO-48 provides 48 TTL digital I/O lines, and one 16- bit counter . The DIO-48 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-48 consists of six 8-bit bi-directional ports and 3 input lines for interrupt enable and counter. The 8-bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All ports are configured as inputs as inputs upon power-up or reset. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 7 .
 
  • Factory automation
  • Product test
  • Test automation
  • Digital I/O control
  • Alarm monitoring
  • 4-channel SSR Output Daughter Board
 
  • DOS sample program(with source codes)
  • DLL and OCX SDK for Windows 98/NT/2000
  • DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
  • VB/VC/Delphi/BCB sample programs with source codes are included
  • LabVIEW toolkit for Windows
  • Driver for Linux and DasyLab
 
Digital Input
Channels 48 (OPTO-22 compatible)
Compatibility 5 V/TTL
Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Response Speed 1.0 MHz (Typical)
Digital Output
Channels 48 (OPTO-22 compatible)
Compatibility 5 V/TTL
Output Voltage Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Output Capability Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V
Response Speed 1.0 MHz (Typical)
Timer/Counter
Channels 3 independent
Resolution 16-bit
Input Frequency 10 MHz max.
Clock Source 32.768 kHz/2 MHz/4 MHz
General
Bus Type ISA
I/O Connector 50-pin box header x 2
Dimensions (L x W x D) 159 mm x 120 mm x 22 mm
Power Consumption 900 mA @ +5 V
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing
 
DIO-48 CR 48-channel Digital I/O Board (RoHS)
 
CA-5002 50-pin flat cable 20 cm
CA-5015 50-pin flat cable 1.5 M
DB-24P 24-channel Photo Couple Isolated Digital Input Daughter Board
DB-24R 24-channel Relay Output Daughter Board
DB-24C 24-channel Open Collector Output Daughter Board
DB-16P8R 16-channel Isolated Digital Input And 8-channel Relay Output Daughter Board
DB-24POR 24-channel Photo Mos Relay Output Daughter Board
DB-24PR 24-channel Power Relay Output Daughter Board
 
I/O Card Main Page
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player