CANopen Master OCX, PISOCPMX.OCX toolkit (exclusively for PISO-CAN series CAN cards)
 
CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network of machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc.

The PISOCPMX.OCX, CANopen Master OCX for ICP DAS PSIO-CAN series CAN cards, is an Object Linking and Embedding (OLE) custom control for users to establish CANopen communication network rapidly. Using the OCX, most of the CANopen communication protocols will be handled by the member function of the OCX automatically. Therefore, it can help users reduce the complexity of developing a CANopen master interface to easily connect with both ICP DAS and/or any other brand¡¦s CANopen slave devices. The general application architecture is charted as below.
 
Features:
  • Support Windows 2000/XP
  • Selectable baud rate: 10 kbps, 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1 Mbps
  • Up to 127 CANopen slave nodes for each CAN port (CAN bus repeater may be needed)
  • CANopen Version: CiA DS-301 V4.01
  • Device Profile: DSP-401 v2.0
  • PDO Mode: Event-triggered, remotely requested, cyclic and acyclic SYNC
  • PDO Dynamic Mapping: Yes
  • NMT: NMT master
  • SDO: SDO client, support upload and download SDO segment and block protocol
  • Error Control: Node Guarding protocol
  • The PDO communication supports single byte output.
  • Provide VC++ 6.0, VB 6.0 and Indusoft demo program
 
Other software supported by PISO-CAN series cards are shown below:
  • Windows 98/NT/2000/XP, and Windows 7 32-bit driver and library
  • LabVIEW 7 or LabVIEW 7.1 CAN toolkit
  • LabVIEW 7 or LabVIEW 7.1 DeviceNet toolkit
  • DASYLab 8.0 CAN toolkit
  • CAN OPC server
  • RTX 8.0 CAN library
  • Linux CAN driver for kernel 2.6.X
  • Linux CANopen master library for kernel 2.6.X
  • Linux DeviceNet master library for kernel 2.6.X
  • CANopen master library
  • DeviceNet master library
  • Windows CE 4.0 driver and library
 
PISOCPMX.OCX toolkit: http://www.icpdas.com/download/pci/piso-can/index.htm

For more information about PISO-CAN series CAN cards, please refer to:
PISO-CAN200 and PISO-CAN400 PCI CAN card:
http://www.icpdas.com/products/Remote_IO/can_bus/piso-can200.htm
http://www.icpdas.com/products/Remote_IO/can_bus/piso-can400.htm

PISO-CAN200U and PISO-CAN400U universal PCI CAN card:
http://www.icpdas.com/products/Remote_IO/can_bus/piso-can200.htm
http://www.icpdas.com/products/Remote_IO/can_bus/piso-can400.htm

PISO-CAN200E PCI Express CAN card:
http://www.icpdas.com/products/Remote_IO/can_bus/piso-can200e.htm

PCM-CAN200 and PCM-CAN200P PCI-104+ CAN card:
http://www.icpdas.com/products/Remote_IO/can_bus/pcm-can200.htm
 
back  
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved