ICP DAS New Product Release: PIO-D96U
Universal PCI, 96–channel Digital I/O Boards
 
 
Introduction:
The PIO-D96U card is the new generation product with RoHS compliance and the new PIO-D96U card is designed to replace PIO-D96.

The PIO-D96U supports 3.3 V/5 V PCI Bus and provides 96 TTL digital I/O lines. The PIO-D96/D96U consists of twelve 8-bit bi-direction ports. All ports are configured as inputs upon power-up or reset.

The PIO-D96U also adds a Card ID switch and pull-high/ pull-low resisters for DI on board. Users may set Card ID on a board and recognize the board by the ID via software when using two or more PIO-D96U cards in one computer. The pull-high/ pull-low resisters specify the DI status; when the DI channels are unconnected, the DI status will remain in high or low status without being left floating.

The PIO-D96U software is fully compatible with the PIO-D96 software. Therefore, the new PIO-D96U series card is totally compatible with PIO-D96 card and requires no software modification. The PIO-D96U supports various OS such as Linux, DOS, Windows 98, Windows 2000, Windows NT, Windows XP 32-Bit, Vista 32-Bit and Windows 7 32-Bit. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.
 
Feature & Special:
  • Universal PCI interface, supports both +5V and +3.3V PCI bus
  
     
     
  • Card ID function, users can set Card ID and recognize one card from the others when users have two or more same model I/O cards.
  
     
     
  • Digital input status can be set to pull-high or pull-low; when the digital input channels are unconnected, the status will hold in high or low status. (non-floating)
  
     
     
  • Up to 96 channels of digital I/O
  • Bi-direction programmable I/O ports under software control
  • All I/O lines buffered on the board
  • Twelve 8-bit bi-direction I/O ports
  • DIO response time is about 0.77 μs (1.3 MHz max.)
  
     
     
  • Software compatible with the PIO-D96
  • Fully compatible with the PIO-DIO series product.
  
     
     
  • Support .NET program
  • Provide Microsoft Visual C#.NET 2005 sample programs
  • Provide Microsoft Visual Basic.NET 2005 sample programs
  • Provide Turbo C++, Borland C++, Microsoft C++ sample programs
  • Provide Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic and LabVIEW sample programs
  
     
     
  • Support Microsoft Windows 7 32-bit version OS
  • Support Microsoft Windows Vista 32-bit version OS
  • Support Windows 98/NT/2000 and XP/2003 32-bit version OS
  
     
  • Connect directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R, DB-24POR, DB-24SSR, DB-24C or any OPTO-22 compatible daughter boards
  • Provide four interrupt sources
    
 
For more information, please refer to…
http://www.icpdas.com/products/DAQ/pc_based/pio_d96.htm
 
back  
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved