ISaGRAF PACs are now supporting the I-8088W, PWM output module, started at the following driver versions.
 
WP-8147/8447/8847 : started at version 1.05

iP-8447/8847 : started at version 1.02

I-8088W supports 8-channel PWM outputs. The duty cycle ( High/(High+Low) ) of the PWM output signal can be from 0.1 to 99.9% . Its output frequency is from 1 Hz to 100KHz. I-8088W supports two output modes; one is the continuous mode, and the other is the burst mode. The former one will output PWM pulse nonstop, and the latter one will output the designated PWM pulse first and then stop.

For more information, please refer to the following websitesĄG
http://www.icpdas.com/faq/isagraf.htm > FAQ-105
http://www.icpdas.com/products/PAC/i-8000/8000_IO_modules.htm > I-8088W
 
back  
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved