ICP DAS New Product: GW-7433D (Modbus TCP server to CANopen master Gateway)
 
 
Introduction:
     The GW-7433D is one of CAN bus products in ICP DAS. It provides CANopen and Modbus/TCP gateway function. GW-7433D solves a mission-critical problem: connecting an existing CANopen network to Ethernet-based PLCs or PC-based system. It enables CANopen networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. On CANopen network, it provides PDO and SDO functions to communicate with slave devices. On the Ethernet network, it acts as a Modbus TCP server. Users can use Modbus TCP class 0, class 1 and partial class 2 function to communicate with GW-7433D. In addition, we also provide friendly utility software for users to configure their device parameters of the GW-7433D.
 
Features:
  • 2500 Vrms photo couple isolation on CAN bus.
  • 1K VDC DC/DC power supply to galvanically isolated bus.
  • 10/100 BASE-T DM9000AE compatible Ethernet Controller
  • 7-segment LED display.
  • Programmable standard CANopen baud, such as 10kbps, 20kbps, 50kbps, 125kbps, 250kbps, 500kbps, 800kbps, 1Mbps.
  • Support maximum 50 TxPDOs, 50RxPDOs, 15SDOs to server.
  • Support communication object: TxPDO, RxPDO, and server SDO.
  • Support max 10 CANopen slave devices.
  • Support on-line configure CANopen slaves.
  • Communicate with CANopen slaves automatically when GW-7433D boots up.
  • Allow 5 Modbus/TCP masters to access GW-7433D simultaneously.
  • CANopen Version: DS301 V4.01
  • Device Profile: DSP-401 v2.0
 
For more detail information, please refer to the following web site.
http://www.icpdas.com/products/Remote_IO/can_bus/gw-7433d.htm
 
   
  back  
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved