ICPDAS

I-7530A RS-232/485/422 to CAN converter is available

I-7530A is a RS-232/485/422 to CAN converter and can accurately converts messages between CAN and RS-232/485/422 communication media. In order to use the CAN network with traditional programmable RS-232/485/422 devices, we provide an easy way to achieve this purpose by several of user function call. It can be used in the application of CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The main feature is described as below:

Microprocessor inside with 20MHz
Built-in CAN to RS-232/485/422 Converter firmware
Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-232/485/422
Support both CAN 2.0A and CAN 2.0B
Built-in RS-232/485/422 and CAN FIFO buffers
Built-in jumper to select 120 ohm terminal resister
Max transmission distance over 1000m (Follow CAN specification)
Power, data flow and error indicator for CAN and RS-232/485/422
Hardware Watchdog design
Provide the transparent communication between the RS-232/485/422 devices via CAN bus
Provide the method to enable different RS-232/485/422 devices into an individual group in CAN bus network. (Full-duplex communication mode of RS-232/422 devices is not supported)

For more information please refer to the website
http://www.icpdas.com/products/Remote_IO/can_bus/I-7530A.htm

back