Introduction

The M-2000 series is a family of network data acquisition and control modules with digital or analog I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU/ASCII protocols. The selectable transmission speed of the RS-485 port is up to 115,200 bps. Modbus has facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. The M-2000 series is slim-type Form Factor I/O that provides the saving space for the installation, easy wiring and distributed I/O points applications. The bias resistor and terminal resistor by switch selectable that is used to improve the communication and solve the communication fail of RS-485 network.

Features

  • RS-485 Industrial Multi-Drop Network
  • Communication Protocols: DCON, Modbus RTU
  • Programmable I/O Type and Range
  • Programmable Power-on Value and Safe Value
  • Dual Watchdog Design
  • 240 Vrms OverVoltagle Protection for AI Modules
  • Slim-Type Form Factor
 

Applications



 

 
Analog Input
Model AI
Channel Resolution Voltage & Current Input Sensor Input Sampling Rate
M-2004 4 (*) 12-bit - 2/3-wire
DS18B20
1 Hz
M-2017 8 16-bit ±150 mV, ±500 mV,
±1 V, ±5 V, ±10 V,
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
- Normal: 10 Hz
Fast: 60 Hz
M-2018-16 16 16-bit ±15 mV, ±50 mV, ±100 mV, ±500 mV,
±1 V, ±2.5 V,
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
(requires an optional external 125 Ω resistor)
Thermocouple: 
J, K, T, E, R, S, B, N, C
10 Hz
M-2004: each port can connect a maximum of 20 DS18B20 sensors. Total 80 sensors.
 
Analog Input with Channel to Channel Isolation
Model AI
Channel Resolution Voltage & Current Input Sensor Inputs Sampling Rate
M-2217CI-4 4 16-bit ±1 V, ±2.5 V, ±5 V, ±10 V,±20 mA - Normal: 10 Hz
Fast: 200 Hz
M-2217CI 8
 
 
Analog Output with Channel to Channel Isolation
Model AO
Channel Resolution Voltage Output Current Output
M-2224CI 4 12-bit 0 ~ +5 V,
0 ~ +10 V
0 ~ +20 mA,
+4 ~ +20 mA
M-2228CI 8