ISO-P32S32W

Phased out

EOL Notification

ISA Bus, 32-ch Isolated DI and 32-CH Isolated Open Collector (Sink, NPN) DO Board (8-ch for 500 mA and 24-ch for 100 mA)

Features

32-CH Isolated DI
32-CH Isolated DO
Isolation Voltage: 3750 Vrms (Using external power)
DC/DC converter build-in
Interrupt handling
Two Interrupt source, channel 0 and channel 16
Open Collector: 500 mA (8-channel), 100 mA (24-channel), Current Sinking, NPN

Introduction

ISO-P32S32W has 32 channels of Isolated DI and 32 channels of Isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each DO offers a NPN transistor and integral suppression diode for inductive load. ISO-P32S32W requires external power to drive the D/I and D/O ports.

This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. ISO-P32S32W has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

Applications

Factory Automation
Product Test
Laboratory Automation

Ordering Information

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES ISO-P32S32W CR	DESCRIPTIONISA Bus, 32-ch Isolated DI and 32-ch Isolated Open Collector (Sink, NPN) DO Board (RoHS) (8-ch for 500 mA and 24-ch for 100 mA) Includes one CA-4037W cable and two CA-4002 D-Sub connectors.

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

Hardware
Connector	Female DB37 x 1 40-pin box header x 1

Digital Input
Channels	32
Type	Wet Contact Photocoupler
Sink/Source (NPN/PNP)	Sink/Source
ON Voltage Level	9 ~ 24 V
OFF Voltage Level	0 ~ 1 V
Response Speed	4 kHz (Typical)
Trigger Mode	Static Update
Isolation	3750 Vrms (Using external power)

Digital Output
Channels	32
Type	Open Collector
Sink/Source (NPN/PNP)	Sink (NPN)
Operation Mode	Static Update
Load Current	500 mA for one high driving channel @ 100% duty 500 mA for all high driving channels @ 100% duty (The GND pins all must be connected with GND of External Power) 100 mA for one low driving channel @ 100% duty 100 mA for all low driving channels @ 100% duty (The GND pins all must be connected with GND of External Power)
Response Speed	4 kHz (Typical)
Isolation	3750 Vrms (Using external power)