2-ch Counter/Frequency Input Module
Features
• 2-channel Counter/Frequency Input
• 32-bit Counter
• Isolated or Non-isolated Input
• Programmable Alarm Output
• Programmable Digital Filter
• Programmable Threshold Voltage Level
• Maximum Frequency of up to 100 kHz
• Dual Watchdog
Introduction
The I-87082 offers 2 high speed counter or frequency input channels and 2 digital output channels. Two types of digital input are provided, one for isolated input, and the other is for nonisolated input. The isolated input provides 3750 Vrms isolation voltage and the non-isolated input provides programmable threshold voltage level. The built-in digital filter is valid for both non-isolated and isolated input and can filter out noise where the high/low pulse width is smaller than the minimum high/low width of the digital filter. The maximum count is up to 32-bit and the maximum frequency is up to 100 kHz. The module also provides programmable alarm output with non-isolated open collectors.
Applications
• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Isolation | |
|---|---|
| Intra-module Isolation | 3750 Vrms |
| LED Indicators | |
|---|---|
| Status | 1 x Power and Communication 8 x I/O |
| Digital Output | |
|---|---|
| Channels | 2 |
| Sink/Source (NPN/PNP) | Sink, Open Collector |
| Load Voltage | +5 VDC ~ +30 VDC |
| Load Current | 30 mA |
| Counter/Frequency/Encoder Input | |
|---|---|
| Channels | 2 |
| Type | Counter or Frequency |
| Counter Mode | Up |
| Counter/Encoder Bits | 32-bits (4,294,967,295) |
| Max. Counter/Frequency | 100 kHz |
| ON Voltage Level | Sensor Type: +3.5 VDC ~ +30 VDC Non-isolated: 0 ~ +5 VDC (Default > 2.4 VDC) 0 ~ +5 VDC (Default < 0.8 VDC) |
| OFF Voltage Level | Sensor Type: +1 VDC Max. Non-isolated: 0 ~ +5 VDC (Default > 2.4 VDC) |
| Frequency Accuracy | 1 Hz or 10 Hz (software selectable) |
| Programmable Alarm Mode | Mode 0: High Alarm Comparator on Counter 0 and Counter 1 Mode 1: Two Steps High Alarm Comparator on Counter 1 |
| Low Pass Filter | 2 ~ 65000 μs |
| COM Ports | |
|---|---|
| Baud Rate | 115200 bps |
| Data Format | N, 8, 1 |
| Protocol | DCON |
| Power | |
|---|---|
| Consumption | 0.9 W Max. |
| Mechanical | |
|---|---|
| Dimensions (mm) | 31 x 116 x 88 (W x L x H) |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +75 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
