ISA Bus, 3-axis Encoder Interface Card
Features
- Accepts Inputs from Incremental or Quadrature Encoders
- 3 independent axes
- Max. Quadrature Input Frequency: 1 MHz
- Counts per Encoder Cycle: X1, X2, X4 (Software selectable)
- Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction
Introduction
The ENCODER300 is a 3-axis quadrature encoder interface board for IBM PC/AT bus-compatible devices. Phase 0, phase 90 and index pulse inputs are provided for each encoder. Inputs may be single ended (A, B or C) or differential (A+, A-, B+, B-, C+ or C-). Power and ground connections are also provided for use by the encoder if needed. Inputs are conditioned by a four-stage digital filter, and the maximum input rate in quadrature decode mode is 1 MHz. The conditioned inputs are applied to a 16-bit counter, which may be used for quadrature decoding, pules or direction-input counting, or as a pulse input up/down counter.
Applications
- Semiconductor Manufacturing
- Component Inspection
- Manufacturing Quality Control
- Food and Beverage Inspection
- Microscopy and Medical Imaging
- Biometrics Applications
- X-Y-Z Table
- Fix-pitch Stamping Machinery
- Transfer Machinery
- Spinner
- Load/Unload
Application System Structure
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| Software | |
|---|---|
| OS Support | Windows 95/98/ME/NT4.0 |
| SDK | DOS 6.2 |
| Hardware | |
|---|---|
| Connector | 25-pin D-Sub |
| General | |
|---|---|
| No. of Axes | 3 |
| Encoder Input | |
|---|---|
| Mode | Quadrant, CW/CCW, PULSE/DIR |
| Counting Rate | 1 MHz (Max.) |
| Pulse Output | |
|---|---|
| Counter Width | 16-bit |
| PC Bus | |
|---|---|
| Type | ISA Bus |
| Power | |
|---|---|
| Consumption | +5 V @ 500 mA |
| Environment | |
|---|---|
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
