DN-DO-16DR-A

Termination board for digital output with high EMS protection and removable relay

Features

Introduction

The DN-DO-16DR-A & DN-DO-16DR-B are termination boards with relay (Form C, SPDT) output. The DN-DO-16DR-A is used for digital output channel 0~15, and the DN-DO-16DR-B is used for digital output channel 16~31. These boards offer 2 output for each channel to extend control logic due to the Form C relay, it can be positive (N.O.) or negative (N.C.) logic output or both. In addition, each channel is built-in two varistors on N.O. and N.C. channel to protect against high-voltage transients and surges to the control loop.

PIN Assignments

Wiring

Applications

Ordering Information

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES DN-DO-16DR-A CR	DESCRIPTIONTermination board for digital output with high EMS protection and removable relay (Ch0 ~ 15) (RoHS)

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

Digital Output
Type	Form C Relay

Relay Output
Contact Rating	Contact configuration: SPDT; Rated current/Max. peak current: 6 A/10 A; Rated voltage/Max. switching voltage: 250 VAC/400 VAC; Minimum switching Load: 300 mW
Operate Time	8 ms
Release Time	5 ms
Mechanical Endurance	20 x 10^6