I-7531-FD-UTA-G - Two-channel Isolated CAN / CAN FD Signal Repeater (-40~+75℃ Operating Temperature)
New Products
2023-02-20
Introduction:
The I-7531-FD-UTA is a CAN/CAN FD signal repeater, which can connect two or more CAN networks that are with the same baud rate. It features wider operating temperature range than I-7531-FD. Based on the signal repeat function of I-7531-FD-UTA, the users can implement tree or star CAN network topology by using different numbers of I-7531-FD-UTA, and when there are too many devices on the CAN network, using I-7531-FD-UTA can increase the driving force of the CAN signal to drive more CAN devices. In addition, the I-7531-FD-UTA features digital isolation 2500 Vrms at the CAN side, and 3000 V DC-DC isolation protection at the CAN side and the power, which can effectively isolate the noise interference amount CAN networks, and achieve protection of a specific CAN network.
Features:
- Support CAN 2.0A/B and CAN FD
- Fully compatible with the ISO 11898-2 standard
- Detect CAN bus baud rate automatically, support maximum 8000 kbps
- Wide Operating Temperature Range: -40 to +75°C
| I-7531-FD-G | I-7531-FD-UTA-G | |
|---|---|---|
| CAN | ||
| Ports | 2 | |
| Specification | ISO-11898-2, CAN 2.0A/B and CAN FD (CAN FD support ISO and Non-ISO standards) |
|
| Time Delay | Typ. 175ns (corresponds to ~35m CAN bus length) | |
| Power | ||
| Input Range | +10 VDC ~ +30 VDC | |
| Consumption | 1W | |
| Environment | ||
| Operating Temperature | -25 ~ +75 °C | -40 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C | -40 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing | |
For more information about the product, please refer to the following website:
https://www.icpdas.com/en/product/I-7531-FD-UTA-G
