|
|
|
|
|
|
|
DN-8368 Series
Photo-isolated terminal board for ICP DAS 6-axis stepper/servo controller |
|
|
|
|
|
∼NEW∼ |
|
|
|
|
|
|
DN-8368GB
DN-8368GB
is for general purpose usage |
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
DN-8368MB
DN-8368MB is for Mitsubishi J2S Servo Amplifier |
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
The DN-8368 series is a daughter-board that is designed for ICP DAS’s 6-axis motion controllers, such as PISO-PS600, PISO-VS600 and PMDK. Each DN-8368xB supports 3-axis and two DN-8368xB are required to support 6-axis. The DN-8368GB is designed for general purpose usage while the DN-8368MB is designed to be easily connected with Mitsubishi MINAS-J2S series servo amplifier. It is not only a screw terminal board for easy connection of signals; it also provides on-board isolating circuitry to protect the controllers. Interface signals are divided into three groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, mechanical switch inputs (Home, near home, limit -switches) and some servo input/output interfaces (Srv_On, ERC, ALM_RST, RDY, Alarm, INP). Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains on-board power module which provides different voltages for other on-board circuitry. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
- High Speed Photo-coupling
Isolated.
- Supporting Pulse Command Type
Step Motors or Servo Motors.
- Providing Power LED and Other
Status LEDs (Home, Limit Switches, …)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Power |
Nominal Load |
0.5
A /24 VDC |
Input Power |
24 VDC, 0.5 A |
Power Consumption |
12 W (24 VDC) |
Environment |
Operating
Temperature |
-25 ~ +75 °C |
Storage
Temperature |
-30 ~ +85 °C |
Operating Humidity |
20 ~ 80% RH, Non-condensing |
Storage Humidity |
10 ~ 90% RH, Non-condensing |
Dimensions |
162 mm X 107 mm |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|