Welcome to the ET-7200/PET-7200 Web configuration page
General Description
The ET-7200/PET-7200 series is a selection of cost effective, high performance 10/100 Mbps I/O modules designed for remote data collection and remote Ethernet application control. Each ET-7200/PET-7200 module includes its own internal Ethernet configuration, Modbus TCP/IP port and web port, with a built-in simple HMI that makes configuration and access easy, together with an I/O LED display to indicate the current transmission status.
 
The ET-7200/PET-7200 supports Modbus/TCP without the need for any additional programming. It can be easily connected to most SCADA software, such as Indusoft, iFix and Labview. The ET-7200/PET-7200 also supports web server access allowing the user to monitor and access the remote I/O from a standard web browser.
Configuration
Provides access to the Ethernet Settings page, which allows you to access the IP settings and check the software version.
Provides access to the Basic Settings page, which allows you to configure the basic information for the web interface.
Provides access to the Common Functions page, which allows you to configure the settings for the module I/O.
Authentication
Provides access to the privilege management page, which allows you to manage user accounts and their associated privileges.
Provides access IP Filter Settings page, which allows you to control access to the web site.
Web HMI
Provides access to the I/O monitor page, which allows you to remotely monitor and control the I/O status of the ET-7200/PET-7200 module.
Provides access the Web Interface Configuration page, which allows you to create dynamic web HMI pages.
More Information
Detail specification and more information about ET-7200/PET-7200 series.