MiniOS7 and firmware update for PDS-8x1 series modules.

1. Configure the 7188xw.ini for the COM port number unsed on PC.
   For example (first parameter of the line 1 in the 7188xw.ini): 
   COM1 ==> C1 B115200 P0 D8 S1
   COM2 ==> C2 B115200 P0 D8 S1

2. Set the init-swith of PDS-800 on Init position.
3. Shorts PDS-800.COM1.TxD pin with PC.COM1.RX pin.
4. Shorts PDS-800.COM1.RxD pin with PC.COM1.TX pin.      

5. Reboot the PDS-800.
6. Double click the UpdateOS.bat for MiniOS7 update.
7. Dobule click the PDS-800.bat for firmware update.

