
===========================================
Jul.18, 2014, v1.2.9

Add: DI FIlter function can ignore high-freq noise for DI detect

Add: Enable / Disable UDP configuration function via web

Add: Monitor Page

Fix: Firmware update method in Run-Mode via web

Fix: ACK/RST Problem  

Fix: Integrate DO control / DI monitor in one page

===========================================
Jul.24, 2013, v1.2.8

Fix: Frequency Measurement shows wrong value on web. Fixed.
     The given frequency value must be divied by 1,000 by client 
     software (or web browser) first, since it contains 3 decimal digits.  
     
     Counter value does not contain decimal digits, so there is no need 
     to recompute it.
     
     Show a "-" if the frequency and counter functions are not enabled. 

Chg: Add description on web for the DI Scan Mode.
     Single Pulse: 0.01 Hz < signal < 100 Hz; 
     1,000 ms: signal > 100 Hz; 100 ms: signal > 1,000 Hz
     
     Set "Single Pulse" mode as default, 
     since this would be more useful in more cases.

Fix: PWM configuration page may not work correctly. Fixed.

Add: Add Ethernet speed configuration via web.
     Supports "Auto 10/100 Mbps", "10 Mbps" and "100 Mbps" options.
     10 Mbps may be used for debugging Ethernet communication problems.

Fix: DHCP may failed (5%) when startup. Fixed.      

Add: Add "Force Reboot" via web.


===========================================
Jan.24, 2013, v1.2.7

Fix: Fix client-mode auto-reconnect issue.

===========================================
Jan.09, 2013, v1.2.6

Add: Supports tET/tPET-PD6 with 6 dry-contact digital inputs.

===========================================
Dec.03, 2012, v1.2.5

Chg: Watchdog adjustment.

Chg: TCP/IP stack memory adjustment.

===========================================
Nov.30, 2012, v1.2.4

Fix: Fix the operation for RST packet, 
     prevents the reseted connection still blocked for a long time.

===========================================
Nov.12, 2012, v1.2.3

Fix: The tET series shows wrong model name. Fixed.

Add: Supports new model tET/tPET-PD2R1 (Dry-contact input). 

===========================================
Sep.21, 2012, v1.2.2

Add: Supports PWM Alarm function.
     When host/slave watchdog timeout, the specified DO channel can be used 
     to continously output ON/OFF.

##
