Copyright March 2002 by ICP DAS CO., LTD. All right reserved.

The ISaGRAF embedded driver is firmware burned into the flash 
memory of the VP-2117/VP-2117-TC. It can be easily upgraded by the user.

Our newly released driver can also be obtained from the following
website.
   ftp.icpdas.com/pub/cd/8000cd/napdos/isagraf/vp2k/driver/  

Warning:
  The copyright of the firmware and ISaGRAF embedded driver belongs to ICP DAS CO., LTD. 
  Only the VP-2117/VP-2117-TC controller have registered a legal ISaGRAF Target license.
  To burn an ISaGRAF embedded driver into others is absolutely illegal and may be punished by law. 

Trademark:
  Products, names and trade names appeared belongs to their respective owner. 

Make sure of your current driver version before you upgrade it. 


************** We use driver version 1.01 as an example ********************


1. Create a file folder named "VP2000" in your hard drive. 
   For example, "c:\vp2k".

2. Copy \Napdos\ISaGRAF\vp2k\Driver\1.01\"7188xw.exe", "7188xw.ini" , "7188xw.f4" ,
   "isa_vp.exe" , "autoexec.bat" ,"isa_data.exe" & "vp_20090612.img" 
   from the CD_ROM into your "vp2000" folder.

3. Run "\vp2k\7188xw.exe" in your hard drive. A "7188xw" screen will appear. 

4. Link COM1 or COM2 of your PC to COM1 of the VP-2117 controller through a RS232 cable. 

5. Power off the VP-2117, change the DIP switch on the left side of control panel to Init, and then power it up.

6. If the connection is Ok, messages will appear on the 7188x screen.

      ICP_DAS MiniOS7 for ViewPAC-2111 Ver. 2.04 build 012,Jun 03 2009 15:48:27
      SRAM:768K, FLASH MEMORY:512K
      [CPU=ICPDAS R2240I]
      CPU internal WDT is ENABLE(WDT time = 0.8 sec)
      Serial number= 5A 5A 5A 5A 5A 5A 5A 5A
      
      VP-2111>

7. Type ver to see the current OS date and version

      VP-2111> ver

      ICP_DAS MiniOS7 for ViewPAC-2111 Ver. 2.04 build 012,Jun 03 2009 15:48:27
      SRAM:768K, FLASH MEMORY:512K
      [CPU=ICPDAS R2240I]
      CPU internal WDT is ENABLE(WDT time = 0.8 sec)
      Serial number= 5A 5A 5A 5A 5A 5A 5A 5A

8.Type "isa_vp *p=", the driver version No. and copyright message will be displayed.

      VP-2111> isa_vp *p=

      VP-2117 Driver: isa_vp.exe - 1.01, Apr.26,2010
      MiniOS7 : Must use vp-20090603.img
      isa_data.exe - 1.01,Jan.25,2010
      NED-ID  : 1
      Licence is OK
      COM1 is Modbus RTU slave port,19200,8,N,1
      COM2 & COM3 are free
      Flash Menory is unprotected; refer to www.icpdas.com > FAQ > Software > 
      ISaGRAF > 089 for more detail info.
      (C)Copyright:ICP DAS  CO. , LTD.      Taiwan Id:84517297


To burn an ISaGRAF embedded driver, follow the following steps. 

9. Power off the VP-2117, change the DIP switch on the left side of control panel to Init, and then power it up.

10. Press "F4" to auto dowload "autoexec.bat","isa_vp.exe","vp_20090612.img"  
   and reboot system. Wait about 60 SEC. to update ISaGRFA system.
   
   ***DO NOT REMOVE THE POWER IN THESE 60 SEC.***   

11. Type "dir" to make sure "autoexec.bat" and "isa_vp.exe" 
    are well burned.

      VP-2111> dir
       0)autoexec.bat 02/26/2003 05:30:00     24[00018]8002:0000-8003:0008
       1)isa_vp.exe   04/26/2010 15:40:20 143038[22EBE]8005:0008-A2F1:0006
      Total File number is 2  Free space=315594 bytes

12. Press ALT_X to exit "7188xw".

13. Please change the DIP switch on the left side of control panel to Run, then reboot the VP-2117 PAC.


