home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > M-7013P
 
M-7013P
1-channel RTD Input Module
 
~ Available soon ~    
  • RTD Input
  • Lead Resistance Elimination for 3/4-wire Connection
  • Open Wire Detection
  • 4 kV ESD Protection
  • High/Low Alarm for Digital Output
  • 50 Hz Event Counter for Digital Input
  • 3000 VDC Intra-module Isolation
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
   
Model: M-7013P    
 
M-7013P is used for measuring temperature by RTD and provide PT100. It supports 2/3/4 wire RTD and features open wire detection and lead resistance elimination for 3/4-wire connection. Besides, it provides 1-channel digital input as 50 Hz event counter and 2-channel digital output as high/low alarm. M-7013P also has qualification for 3000 VDC intra-module isolation.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
RTD Input Module
Channels 1
Wiring 2/3/4 Wire
Sensor Type Pt100
Resolution 16-bit
Accuracy ±0.05%
Sampling Rate 10 Hz
Open Wire Detecti Yes
3-wire RTD Lead Resistance Elimination Yes
Digital Input
Channels 1
Sink/Source (NPN/PNP) Source, Dry Contact
On Voltage Level Close to GND
Off Voltage Level Open
Counter (50 Hz, 16-bit) Yes
Overvoltage Protection ±30 VDC
Digital Output
Channels 2
Type Open Collector, MOSFET
Sink/Source (NPN/PNP) Sink
Load Voltage 3.5 ~ 50 VDC
Max. Load Current 700 mA/Channel
Overvoltage Protection 60 VDC
Overload Protection 1.4 A (with Short-circuit Protection)
Power-on Value Yes
Safe Value Yes
Humidity 10 ~ 95% RH, Non-condensing
 
Communication
Interface RS-485
RS-485 Bias Resistor No (An RS-485 master is required to provide the bias.)
Format (N, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators -
7-Segment LED Display -
Isolation
Intra-module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for the Power Line
±2 kV for the RS-485 Port
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.0 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
 
M-7013P-G CR 1-channel RTD Input Module Using the DCON Protocol (Gray Cover) (RoHS)
 
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7-channel Differential or 14-channel Single-ended Surge Protector (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player