| |
| WP-8000 vs. WP-9000 I/O Modules Comparison |
|
|
|
| |
|
| |
| Modules Comparison |
|
|
| |
|
|
Modules Migration
|
|
|
The migration of using WP-8000 platfroms with I-8K/I-87K series modules to WP-9000 platforms with I-9K/I-97K series modules. Some programs and wiring connections may be needed to modify. Rerfer to the following table for migrating from I-8K/87K modules to I-9K/I-97K modules. |
|
|
| |
| TOP |
| |
|
| New Features for I-9K/I-97K modules |
| |
Spring clamp terminal connector The spring clamp terminal block for the I/O module connector of WP-9000-CE6 offers the advantages (anti-vibration, stable clamping and installation easier) relative to screw terminals.
Except I-9040/I-9041 modules, the other I-9K modules support spring clamp terminal connector. |
 |
| |
| TOP |
| |
|
| The Difference of I-8K/I-87K and I-9K/I-97K modules |
|
| |
The height of the i-9K/i-97K module including the terminal block plugged on a WP-9000 controller is 164mm, and the height of i-8K/87K module plugged on WP-8000 controller is 111 mm. |
|
|
| |
| (Unit: mm) |
| TOP |
| |
|
|
The Common features of all I-9K/I-97K modules |
| |
|
|
| |
| TOP |
| |
|
|
I-8040W & I-9040 |
| |
| Hardware Different |
| |
| 1ms/5ms/10ms/20ms/40ms/70ms (by Jumper select) or CPU parameter setting (Default Setting is 10ms) |
| 1ms/5ms/10ms/20ms/40ms/70ms (by Jumper select) or CPU parameter setting (Default Setting is 10ms) |
| 0.13 A@5 V =0.65 W, +/-5 % For Hardware version 1.6 |
0.2 A@5 V =1 W, +/-5 % For Hardware version 1.0 |
|