ZB-2026-T/ZB-2026-PA
Wireless 4-channel Voltage Input, 2-channel Voltage Output,
2-channel Digital Input and 2-channel Digital Output Module |
|
|
| |
| ~ Phased out ~ |
|
|
 |
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
- Wireless Transmission Range up to 700 m (PA-Version)
- Wireless Transmission Range up to 100 m (T-Version)
- GUI Configuration Software (Windows Version)
- 4 AI, 2 AO, 2 DI and 2 DO Channels
- Individual Channel Configuration
- Overvoltage Protection is up to 240 Vrms
- Surge and ESD Protection
- DIN-Rail Mountable
|
|
 |
 |
|
| Model: ZB-2026-T |
Model: ZB-2026-PA |
|
|
| |
 |
The ZB-2026-T/ZB-2026-PA is a wireless ZigBee module that offers 4 differential analog input channels, 2 analog output channels, 2 digital input channels and 2 digital output channels and provides a programmable analog input and output range. Each analog input channel can be configured to an individual range and each has 240 Vrms overvoltage protection. There are also options for a power-on value and a safe value. Users can easily configure the module address, protocol, checksum, ZB-PID, ZB-channel and type code settings using a combination of rotary and DIP switches. |
| |
 |
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment. |
 |
| |
 |
| Models |
ZB-2026-T |
ZB-2026-PA |
| Analog Input |
| Input Channels |
4 Differential |
| Input Types |
+/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV or -20 mA ~ +20 mA
(Requires Optional External 125 Ω Resistor) |
| Resolution |
16-bit |
| Sampling Rate |
10 Samples/Second (Total) |
| Accuracy |
+/-0.1% of FSR |
| -3dB Bandwidth |
15.7 Hz |
| Zero Drift |
+/-20 μV/°C |
| Span Drift |
+/-25 ppm/°C |
| Common Mode Rejection |
86 dB |
| Normal Mode Rejection |
100 dB |
| Input Impedance |
>2 M[ |
| Overvoltage Protection |
240 Vrms |
| Individual Channel Configuration |
Yes |
| Analog Output |
| Output Channels |
2 |
| Output Types |
+/-10 VDC, +/-5 VDC, 0 ~ 10 VDC or 0 ~ 5 VDC |
| Resolution |
12-bit |
| Accuracy |
+/-0.1% of FSR |
| Zero Drift |
+/-30 μV/°C |
| Span Drift |
+/-25 ppm/°C |
| Programmable Output Slope |
0.0625 ~ 512 V/Second |
| Voltage Capability |
20 mA @ 10 V |
| Power-on and Safe Value |
Yes |
| Digital Input |
| Input Channels |
2 (Sink) |
| On Voltage Level |
3.5 VDC ~ 50 VDC |
| Off Voltage Level |
1 VDC Max. |
| Input Impedance |
10 KΩ |
| Event Counters |
Channels : 2 |
| Max. Count: 16-bit (65535) |
| Max. Input Frequency: 50 Hz |
| Min. Pulse Width: 10 ms |
| Digital Output |
| Output Channels |
2 (Sink) |
| Output Types |
Isolated Open Collector |
| Max. Load Current |
700 mA/channel |
| Load Voltage |
+5 VDC ~ +50 VDC |
| Short Circuit Protection |
Yes |
|
| |
 |
| Models |
ZB-2026-T |
ZB-2026-PA |
| Communication Interface |
| Wireless Standards |
ZigBee, IEEE 802.15.4 |
| Transmission Power |
4 dBm |
22 dBm |
| 2.4 GHz Antenna |
3 dBi Omni directional |
5 dBi Omni directional |
| Transmission Range (LoS) |
100 m |
700 m (Typical)
1 km (Max.) |
| Certification |
CE/FCC, FCC ID |
- |
| Max. Slaves in a ZigBee Network |
254 |
| ZB-100R/ZB-100T Support |
Yes |
| Protocols |
Supports DCON and Modbus RTU Protocols |
| Hot Swap |
Rotary and DIP switch |
| LED Indicators |
| Power |
1 LED, red |
| ZigBee Communication |
1 LED, green |
| Isolation |
| Intra-module Isolated, Field-to-Logic |
2500 VDC (for AI, AO, DI and DO) |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point |
| EFT (IEC 61000-4-4) |
4 kV for Power Line |
| Power |
| Input Voltage Range |
+10 VDC ~ +30 VDC (Reverse Polarity Protection) |
| Power Consumption |
2.1 W Max. |
| Mechanical |
| Flammability |
Fire Retardant Materials (UL94-V0 Level) |
| Dimensions (W x L x H) |
33 mm x 87 mm x 107 mm |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 °C ~ +75 °C |
| Storage Temperature |
-30 °C ~ +80 °C |
| Relative Humidity |
10 ~ 90% RH, Non-condensing |
|
| |
 |
| ZB-2026-T CR |
Wireless 4-ch Voltage Input, 2-channel Voltage Output, 2-channel Digital Input and 2- channel Digital Output Module (RoHS) |
| ZB-2026-PA CR |
Wireless 4-ch Voltage Input, 2-channel Voltage Output, 2- channel Digital Input and 2- channel Digital Output Module (RoHS)
(Long Range) |
Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a
ZB-2550-T, ZB-2550-PA, ZB-2570-T or ZB-2570-PA ZigBee host converter when you purchase ZigBee Data Acquisition Products. |
|
| |
 |
| MDR-20-24 |
24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting |
| ZB-2510 CR |
ZigBee Repeater (RoHS) |
| ZB-2010-PA CR |
ZigBee Repeater (RoHS) |
| ZB-2550 CR |
RS-485/RS-232 to ZigBee Converter (Host) |
| ZB-2550-PA CR |
RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |
| ZB-2570-T CR |
Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS) |
| ZB-2570-PA CR |
Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |
|
| |
|
|
| |
|
|
