| |
|
| |
| |
|
|
RSM-405
5-Port Real-time Redundant Ring Switch with metal case |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
 |
|
|
|
| |
|
|
| |
The RSM-405 is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. RSM-405 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. It detects and recovers from a fiber or copper link failure within approximately 300ms ¡V for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.
RSM-405 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RSM-405's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 3.2Gbps high performance memory bandwidth
- Frame buffer memory : 1 Mbit
- Integrated look-up engine with dedicated 2 K unicast MAC addresses.
- Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output
- Supports operating temperatures from -30¢XC ~ +70¢XC
- DIN rail mount and Screw hole for wall mounting kit.
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| Technology |
| Completely compliant |
IEEE 802.3, IEEE 802.3u, IEEE802.3x |
| Ethernet switch type |
Intelligent store & forward |
| MAC addresses supported |
2K |
| Memory Bandwidth |
3.2 Gbps |
| Interface |
| RJ45 ports (shielded) |
10/100BaseT(x) |
| RJ45 speed (auto-negotiating) |
10 Mbps or 100 Mbps |
| RJ45 auto-mdi/mdi-x |
All 5 ports |
| Ethernet isolation |
1500 VRMS 1 minute |
| Power |
| Required supply voltage |
+10 ~ +30 VDC |
| Power input isolation |
1KV |
Power consumption
(Redundant input terminals) |
5 W
(typical - all ports active at 100 Mbps) |
| Mechanical |
| Case |
Metal case |
| Flammability |
UL 94V-0 |
| Dimensions |
64mm x 110mm x 97.5mm (W x H x D) |
| Installation |
DIN rail mount |
| Environmental |
| Operating Temperature |
-30¢XC ~ +75°C |
| Storage Temperature |
-40¢XC ~ +85°C |
| Include cable |
| CA-090510 x 1 |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| RS-405 CR |
5-Port Real-time Redundant Ring Switch (RoHS) |
| RSM-405 CR |
5-Port Real-time Redundant Ring Switch with metal case (RoHS) |
| RS-408 CR |
8-Port Real-time Redundant Ring Switch (RoHS) |
| RSM-408 CR |
8-Port Real-time Redundant Ring Switch with metal case (RoHS) |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| CA-090510 |
9-pin Female D-sub & RJ-45 cable, 1M Cable |
| PWR-24/110 |
24V/0.2A Power Supply, (No-mounting) |
| KWM020-1824F |
24V/0.75A Power Supply, (No-mounting) |
| DIN-KA52F |
24V/1A Power Supply, (With DIN-Rail mounting) |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
