|
| |
|
| |
~NEW~ |
| |
| |
|
| Model: NS-205PF series |
Model: NSM-205PF series |
|
|
|
NS-205PF series/NSM-205PF series
4-Port 10/100 Mbps PoE (PSE) with 1 fiber port Switch |
 |
 |
 |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and highdistance (up to 60 km) transmissions. |
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
- Provides 1 x 100-FX fiber port plus 4 x PoE ports
- Automatic MDI/MDI-X crossover for plug-and-play
- Each port supports both 10/100Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Power Input, +46 ~ +55 VDC
- Supports operating temperatures from ¡V30 ~ +75¢XC
- DIN-Rail
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| Models |
NS-205PF series |
NSM-205PF series |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type |
Store & forward, wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE802.3x flow control, back pressure flow control |
| Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act , 10/100M, Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| +/-4 kV ESD Protection |
Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
Multi-Mode
(NS-205PFT/FC;NSM-205PFT/FC) |
Multi mode fiber cables:50/125, 62.5/125 or 100/140 £gm
Distance :2 km, (62.5/125 £gm recommended) for full duplex
Wavelength : 1300 or 1310nm
Min. TX Output:- 20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Max. RX Overload: -8 dBm
Budget: 12 dBm |
Single-Mode
(NS-205PFCS;NSM-205PFCS) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125£gm
Distance: 30 Km, (9/125 £gm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Max. RX Overload: -5 dBm
Budget: 19 dBm |
Single-Mode
(NS-205PFCS-60;NSM-205PFCS-60) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125£gm
Distance: 60 Km, (9/125 £gm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Max. RX Overload: -5 dBm
Budget: 30 dBm |
| Power Input |
| Input Voltage Range |
+46 ~ +55 VDC for PoE output |
| Power Consumption |
0.08 A@ 48 VDC without PD loading; 1.5 A@ 48 VDC with PD full loading |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connection |
3-Pin Removable Terminal Block |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
| PoE Classification |
PSE (Power Sourcing Equipment) |
| PoE Voltage |
+48 VDC depending on power input |
| PoE Power |
Up to 15.4 watts per channel |
| PoE Operation |
Automatic detection and power management |
| PoE Pin assignments |
V+ (Pin 1,2), V- (Pin 3,6) |
| PoE disconnect mode |
DC disconnect |
| Mechanical |
| Casing |
Plastic (Flammability UL 94V-0) |
Metal (IP30 Protection) |
| Dimensions (W x L x H) |
31 mm x 157 mm x 113 mm |
25 mm x 168 mm x 119 mm |
| Installation |
DIN-Rail |
| Environmental |
| Operating Temperature |
-30 ¢XC ~ +75 ¢XC |
| Storage Temperature |
-40 ¢XC ~ +85 ¢XC |
| Ambient Relative
Humidity |
10% ~ 90% RH, non-condensing |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| NS-205PFT CR |
Multi-mode, ST Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFC CR |
Multi-mode, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFCS CR |
Single-mode 30 Km, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NS-205PFCS-60 CR |
Single-mode 60 Km, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS) |
| NSM-205PFT CR |
Multi-mode, ST Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFC CR |
Multi-mode, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFCS CR |
Single-mode 30 Km, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
| NSM-205PFCS-60 CR |
Single-mode 60 Km, SC Connector, 4-Port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS) |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| MDR-60-48 |
48V/1.25A, 60 W Power Supply with DIN-Rail Mounting |
| DIN-KA52F-48 |
48V/0.52A, 25 W Power Supply with DIN-Rail Mounting |
| DR-120-48 |
48V/2.5A, 60 W Power Supply with DIN-Rail Mounting |
|
|
| |
|
|
| |
|
|
|
|
