NC-10TFT

~Phased out~

Model: NC-10TFT

NC-10TFT 10 Base-T to FL Media Converter

The NC-10TF series consists of three models of media converters: NC-10TFT,NC-10TFC. These converters are designed to convert 10 Base-T to /from 10 Base-T to/from 10 Base-FL media type. The NC-10TF series supports three fiber media types: multimode ST and SC connectors respectively. All three models support convenient connection to either a straight-through or a cross-over cable on the UTP end. The NC-10TF series converters are cost effective and easy solutions for use in a mixed cabling environment or extending the network span to include a fiber optic backbone.

back

Complies with 802.3 10 Base-T and 10 Base-FL standards
Provides media conversion from UTP to Fiber Optic media types
Extends network span up to 2km(multimode fiber)
Provides a push button to set crossover function for the TP port
Interoperable with other 10Base media converters, 10Base, NICs, hub or switching
Provides LEDs for easy network monitoring
Supports a variety of fiber optic connectors including duplex multimode ST, SC

back

Technology
Standards	IEEE802.3
Processing Type	Store & forward wire speed switching - no delays
MAC Addresses	1024
Memory Bandwidth	1.4 Gbps
Interface
RJ45 port	10 BaseT, F/H duplex mode
Fiber Optic port	10 Base-FL(Multi-mode; ST connector)
LED Indicators	10M, Link/Act
Ethernet Isolation	1500 Vrms 1 minute
Frame Ground for EMS Protection	Yes
Fiber Optic	Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm
	Distance :2 km, (62.5/125 μ mrecommended) for full duplex
	Wavelength : 850 nm
	Min. TX Output: -20 dBm
	Max. TX Output: -14 dBm
	RX Sensitivity: -34 to -31 dBm
Ethernet Transmission distance	Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Ethernet Transmission distance	Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Power
Input Voltage Range	+10 ~ +30VDC (Non-isolation)
Power consumption	0.15A@24VDC, +/- 5% arrowed with 10M Full duplex
LED Indicator	Yes
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	2-Pin Removable Terminal Block
Mechanical
Case	Metal
Environmental rating	IP20
Dimensions	26mm x 150mm x 125mm (W x H x D)
Installation	DIN rail mount; Wall Mounting
Environmental
Operating Temperature	0 ~ +50°C
Storage Temperature	-10 ~ +70°C
Ambient Relative Humidity	10% to 90% non-condensing

back

SC type

ST type

back

Model	Description	Fiber Mode	Connector	Power input
NC-10TFT	10M Fiber Optical to 10M RJ-45 Connector	MultiMode	ST	DC10~30V

back