|
| |
|
| |
~NEW~ |
| |
|
|
FR-2017iT
8/16-channel Isolated Analog Input Module With High Voltage Protection And Isolated Communication Line |
 |
 |
 |
 |
| |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
The FR-2017iT is a 12-bit, 8-channel differential or 16-channel single-ended analog inputs module that provides two ways to select input range (+/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA, 0~20mA and 4~20mA). One way provides switch selectable the same range at all channels and another each analog channel is allowed to configure an individual range by software selectable. It also has 240Vrms high over voltage protection for all analog inputs.
The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2017iT/2024iT; refer to literatures related to I-7188EF, I-8172W, and FRB-100/200/200U. |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
- Built-in wire-saving FRnet control
- High-speed transmission reliability
- Simple synchronization mechanism
- No software overhead on protocol processing
- Supporting broadcasting (1:n data transmission)
- Duplicating output easily
- Fixed I/O scan-time and I/O synchronization
- DIN-Rail mountable
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
| Analog Input |
| Input Channels |
8 differential or 16 single-ended, switch selectable |
| Input Type |
+/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V
+/-20mA ,0~20mA, 4~20mA (requires optional external 125 Ohm resistor for current input) |
| Resolution |
16-bit (1 channel) / 12-bit (8/16 channels) |
| Sampling Rate |
10 samples/ second (1 channel) / 50 samples/ second(8/16 channels) total |
| Accuracy |
+/-0.1% (1 channel) / +/-0.5%(8/16 channels) or better |
| Bandwidth |
15.7Hz (1 channel) / 78.7Hz (8/16 channels) |
| Zero Drift |
+/-20uV/¢XC |
| Span Drift |
+/-25ppm/¢XC |
| Input Impedance |
Voltage: 2M Ohm (Differential), 1M Ohm (Single-ended) |
| Common Mode Rejection |
86dB min. |
| Normal Mode Rejection |
100dB |
| Individual Channel Configuration |
Yes (by software, requires optional CA-0904 cable) |
| Over Voltage Protection |
Differential: 240 Vrms, Single-ended: 150Vrms |
| Connection |
20-Pin Removable Terminal Block |
| Interface |
| Isolation Voltage |
3000 Vrms |
| 2-wire Cabling |
Belden 9841 (2P twisted-pair cable),
When different cables are used, the transmission distance may be changed |
| Transfer Distance |
Max. 400m for speed 250K
Max. 100m for speed 1M (Default) |
| LED Indicators |
Power, Communication Run, Communication Error, Terminal resistor, Digital output |
| Transfer Speed |
250Kbps and 1Mbps (Default)
DIP Switch Selectable |
| Cyclic Scan Time |
2.88ms for speed 250K
0.72ms for speed 1M (Default) |
| Power |
| Input Voltage Range |
+10 ~ +30 VDC (Non-isolation) |
| Power Consumption |
2.4 W Max |
| Connector |
5-Pin Removable Terminal Block |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV contact for power line, communication line and each channel
8 kV air for random point |
| EFT (IEC 61000-4-4) |
4 kV for power liner |
| Surge (IEC 61000-4-5) |
3 kV for power liner |
| Case |
| Mechanical |
Plastic |
| Flammability |
UL 94V-0 materials |
| Dimensions (W x H x D) |
32.5 x 110 x 102 mm |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 ¢XC ~ +75 ¢XC |
| Storage Temperature |
-30 ¢XC ~ +85 ¢XC |
| Humidity |
10% ~ 90% non-condensing |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| FR-2017iT |
8/16-channel Isolated Analog Input Module With High Voltage Protection And Isolated Communication Line |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| CA-0904 |
4-pin connector & 9-pin Female D-sub cable |
| GPSU06U-6 |
24 V/0.25 A Power Supply, (No-mounting) |
| DIN-KA52F |
24 V/1 A Power Supply, (With DIN-Rail mounting) |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
