|
| |
|
|
 |
|
|
| |
| |
 |
| iVIEW-100 |
|
|
|
|
|
iVIEW-100
Handheld Controller |
 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
The iVIEW-100 is a low cost/high performance graphic, handheld embedded controller designed for industrial environment that require high reliability, PC-compatibility, and it is compactness. It includes a 128X64 dot, Green STN LCD display, full numeric keypad, eight function keys and one buzzer inside.
The iVIEW-100 is powered by an 80188-20 processor, with 512K bytes of SRAM and 512K bytes of flash memory. The standard version has one 5-wire RS-232 port, one RS-232/485 port, and one power input port. All those signals and power lines go through our CA-1509 cable set. It has one 9-pin Mini-DIN female connector, which can be used as a 4 digital input and a 2 relay output. The user can switch the output channels from relay to open collector output channels via an internal jumper.
The iVIEW-100 can be used as a LCD display for our I-7188 and I-8000 series embedded controller, and are going to port ISaGRAF software PLC to iVIEW-100 soon. We will provide iVIEW-100 with a 10/100 mega Ethernet port in the near future. Since the basic hardware architecture of iVIEW-100 is similar to that of our I-7188 Series, all our available software can be used in iVIEW-100. |
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| Embedded CPU, 80188, 20M Hz |
| 512K SRAM & 512K Flash ROM |
| Built-in RTC & NVSRAM & EEPROM |
| Built-in 2 channels of COM port |
| COM driver support interrupt & 1K QUEUE input buffer |
| Built-in watchdog timer for harsh environment |
| Built-in power protection circuit |
| Built-in RS-485 network protection circuit |
| Program download from PC |
| MiniOS7 inside |
| Year 2000-compliance |
| RTC leap year compensation from 1980 to 2079 |
| BIOS support RTC time & date |
| MiniOS7 support RTC time & date |
| 64-bit Hardware Unique Serial Number |
| Built-in LCD display |
| LED type yellow-green backlight |
| Full numeric membrane keypad |
| 4 digital input channels and 2 relay output channels (Can be jumper selected to 4 open collector output channels) |
| One buzzer inside |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| System |
| Module: Iview100 Handheld Controller |
| CPU:80188, 20M Hz |
| SRAM:512K bytes |
| FLASH:512K bytes |
| COM port: COM 1,2 |
| Built-in EEPROM |
| Support I/O, Expansion Bus |
| Program download with COM 1 |
| Real Time Clock |
| Year-2000 compliance |
| Seconds, minutes, hours, date of the month |
| Month, year, valid up form 1980 to 2079 |
| NVSRAM : 31bytes, data valid up to 10years |
| Lithium battery for RTC & NVSRAM |
| EEPROM |
| 2048 bytes |
| Data retension >100years |
| 1000000 erase/write cycles |
| Flash Memory |
| 512K bytes |
| 64K bytes are used by MiniOS7 |
| At least 64K bytes are used by MiniOS7 |
| Others can be use to store data.(128K bytes max.) |
| Erase unit is one sector(64K bytes) |
| 100,000 erase/write cycles |
| COM1 |
| RS-232 |
| MaxSpeed:115200 |
| COM2 |
| RS-232 or RS-485 |
| RS-485 : self-tuner |
| MaxSpeed:115200 |
| Display |
| LCD |
| 128*64 dots |
| VA:72*40mm |
| STN,YellowGreen |
| Backlight:LEDYellowGreen |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| one piece of IView module |
| one cable, CA1518-A, for download from PC, or link to other RS-232 device |
| one piece of companion CD for software |
| User manual |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
| iVIEW-100 |
Handheld Controller with 512k flash ,512k SRAM, CPU is 20MHz |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
