STEP-200
ISA Bus, 2-axis High-speed Stepper Motor Control Card
(Limited Functions and Economical) |
|
| |
| |
 |
| Model: STEP-200 |
|
|
 |
- 2-axis independent, simultaneous stepper motor control/servo
motor control (Pulse input type)
- Drivers for DOS, Windows 95/98/ME, Windows NT
- Embedded Microprocessor
- Command Type Interface
- Linear and circular interpolation
- Acceleration/deceleration:
Automatic trapezoidal acceleration/deceleration
- Output polarity can be programmable
- 5 optical isolated digital inputs per axis for limit switches
|
|
|
| |
 |
| The STEP-200 is a 2-axis, command-based stepper motor controller board for IBM PC/XT/AT bus-compatible devices. The board can also be used for pulse-type servo motor control (pulse input type). The board includes a build-in μP that performs a variety of motion control commands and shares the loading of the host computer. A 2 KB FIFO is included as a command buffer, which provides a buffer time of 1360 ms. The hardware architecture of STEP-200 is ideal for the Windows operating system, and drivers for DOS and Windows are provided offering real-time motion
control solutions for Windows systems. |
|
| |
 |
| General |
| Number of Axes |
2 |
| Slot Interface |
ISA bus |
| Pulse Output Rate |
250 KHz (Max.) |
| Command Type |
Pulse Command |
| Resolution |
32-bit |
| Servo Update Rate |
- |
| Pulse Output Mode |
CW/CCW, PULSE/DIR |
| Operation Mode |
Open loop |
| Linear Interpolation |
- |
| Circular Interpolation |
- |
| Speed Curve Profile |
T-curve |
| Synchronous Action |
- |
| Ring Counter Mode |
32-bit |
| Position Control Mode |
Incremental mode and absolute mode |
| Position Compare Trigger |
10 KHz |
| Encoder Interface |
- |
| Encoder Counter |
- |
| Encoder Counting Rate |
- |
| I/O Isolation |
2500 Vrms optical isolation |
| Connector |
25-pin D-Sub |
| Motion Relative I/O |
| Mechanical Switch Input |
Home, forward, backward limit, EMG |
| Servo I/O Interface |
Output: SVON |
| Digital Input |
| Digital Input Channels |
- |
| Digital Output |
| Digital Output Channels |
- |
| Power |
| Power Consumption |
+5 V @ 500 mA |
| Environmental |
| Operating Temperature |
0 ~ +50°C |
| Storage Temperature |
-20 ~ +70°C |
| Ambient Relative Humidity |
0 ~ 90% RH, non-condensing |
| Software Support |
| Windows Driver/DLL/Lib |
Windows 95/98/ME/NT4.0 |
| DOS Library |
DOS 6.2 |
| Labview Development Kit |
- |
| Linux Library |
- |
|
| |
 |
| STEP-200 |
ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical)
Includes: Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover) |
|
| |
 |
| DN-25 |
I/O Connector Block with 25-pin/9-pin D-Sub Connector (DIN-Rail Mounting) |
|
| |
|
