|
PMDK
PCI Bus, DSP-based Professional Motion Development Kit |
|
|
|
 |
Model: PMDK |
|
|
 |
- DSP-based control card with PCI interface
- Capable of 6-axis motion control
- Pulse Output Rate: 4 MHz (Max.)
- Maximum Encoder input frequency: 12 MHz
- High-speed position latching and comparing functions
- Home, positive and negative limit sensors for each axis
- Manual-pulse-generator (MPG) interface
- Expandable Remote I/O: 128 DI and 128 DO via a two-wire FRnet interface
|
|
|
|
 |
The PMDK is a DSP-based PCI motion control card suitable for the development of professional motion control applications, and can be used with any IPC that has a 5 V PCI bus. A wide range of applications can be implemented thanks to the integration
of a high-speed DSP (TI C672x), an FPGA (Field Programmable Gate Array), and I/O buffering circuitry. A diverse array of I/O interfaces are incorporated into the PMDK, including 6 channels for pulse I/O, 6 channels for AI/AO and a variety of DI/DO channels. The card also includes a single 2-wire FRnet port that can be used to remotely control up to 128 DI and 128 DO channels, which, together with the numerous software samples that are provided, allows the rapid development of custom programs.
The PMDK enables users to implement a variety of cost-effective motion control functions, including multi-axis linear and circular interpolation with acceleration/deceleration processing. A variety of synchronous actions are also possible through programming. The included sample software can be used to design custom motion functions which can then be appended to the original motion command set. DSP programs are developed based on a real-time kernel (DSP/BIOS), meaning that motion status, FRnet I/O status and the status of other I/O interfaces can still be monitored while driving operations are being performed, and, as the loading on the CPU is very low, one or more motion cards can be used on a single IPC.
If the PMDK is to be used for signal processing, users can refer to a range of samples provided by ICP DAS illustrating how to implement FFT, FIR and IIR, together with the resources provided by TI. In the future, ICP DAS will be providing a wider library of functions and examples that will further reduce the level
of programming required by users in order to implement their custom applications. In summary, the PMDK is a highly cost-effective solution for users intending to develop custom applications for motion control, process control, I/O logic control, digital processing, and applications in a wide range of other domains. |
|
|
 |
General |
Number of Axes |
6 |
Slot Interface |
Universal PCI Bus |
Pulse Output Rate |
4 MHz (Max.) |
Command Type |
Pulse command, V command |
Resolution |
32-bit |
Servo Update Rate |
User Programmable |
Pulse Output Mode |
CW/CCW, PULSE/DIR |
Position Compare Trigger |
User Programmable |
Encoder Interface |
A/B pulse, Up/Down |
Encoder Counter |
32-bit |
Encoder Counting Rate |
12 MHz |
I/O Isolation (with DN-8368) |
2500 Vrms optical isolation |
Connector |
68-pin SCSI-II connector & 20-pin SCSI-II |
Motion Relative I/O |
Mechanical Switch Input |
Home, LMT+/-, NHOME, LTC, EMG |
Servo I/O Interface |
Input: INP, ALM, RDY
Output: SVON, ALM_RST, ERC |
Digital Input |
Digital Input Channels |
Expandable: 128 DI |
Digital Output |
Digital Output Channels |
Expandable: 128 DO |
Power |
Power Consumption |
1.5 A |
Environmental |
Operating Temperature |
-20 ~ +75°C |
Storage Temperature |
-30 ~ +85°C |
Ambient Relative Humidity |
5 ~ 90% RH, non-condensing |
|
|
 |
PMDK |
PCI Bus DSP-based Professional Motion Development Kit |
|
|
 |
DN-8368UB |
Photo-isolated Universal Snap-on Wiring Terminal Board |
DN-8368GB |
Photo-isolated General Purpose Wiring Terminal Boar |
DN-8368MB |
Photo-isolated Snap-on Wiring Terminal Board for Mitsubishi MELSERVO-J2 Servo Amplifier |
DN-20M |
Manual-Pulse-Generator (MPG) and FRnet Input Board for PMDK/VS600/PMDK |
CA-MINI68-15 |
68-pin VHDCI to SCSI-II Connector Cable, Length 1.5 M |
CA-SCSI20-M1 |
20-pin SCSI-II Male Connector Cable for Mitsubishi J2 Series Motor, Length 1 M |
CA-SCSI20-M3 |
20-pin SCSI-II Male Connector Cable for Mitsubishi J2 Series Motor, Length 3 M |
CA-SCSI20-M5 |
20-pin SCSI-II Male Connector Cable for Mitsubishi J2 Series Motor, Length 5 M |
CA-2P4C-0100 |
The Cable for FRnet Modules, Length 100 M |
|
|
|
|
|
|
|