home > product> solutions > pc based i/o board > motion control boards
 
DN-8237 Series
Photo-isolated terminal boards for ICP DAS two-axis stepper/servo controller
   
 
     
  DN-8237UB
Universal Snap-on wiring terminal board
   
     
     
  DN-8237GB
General purpose wiring terminal board
   
     
     
  DN-8237MB
Snap-on wiring terminal board for Mitsubishi MELSERVO-J2 servo amplifier
   
     
     
  DN-8237PB
Snap-on wiring terminal board for Panasonic MINAS A4/A5 servo amplifier
   
     
     
  DN-8237YB
Snap-on wiring terminal board for Yaskawa Sigma II/III/V servo amplifier
   
     
     
  DN-8237DB
Snap-on wiring terminal board for Delta ASDA-A servo amplifier
   
     
 
 
The DN-8237 series is a daughter-board that is designed for ICP DAS’s 2-axis motion controllers, such as I-8092F and PISO-PS200. And they are for different motor drivers, such as general purpose usage, Mitsubishi and Panasonic motor amplifier. It is a not only a screw terminal board for easy connection of signals; it also provides onboard isolating circuitry to protect the controllers. Interface signals are divided into four groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, special purpose inputs (Home, near home, limit -switches) and a servo-enable output. Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains onboard power module which provides different voltages for other onboard circuitry. And this power module accepts wide range input power (20 ~ 26 VDC).
 
  • High Speed Photo-coupling Isolated.
  • Supporting Pulse Command Type Step Motors or Servo Motors.
  • Providing Power LED and Other Status LEDs (Home, Limit Switches, …)
  • Providing FRnet Terminal for High-speed Serial I/O Expansion when the Controller Supports FRnet.
 
Power
Nominal Load 0.5 A /24 VDC
Input Power 20 ~ 26 VDC, 0.5 A
Power Consumption 12 W (24 VDC)
Environmental
Operating Temperature -20 ~ +75 °C
Storage Temperature -30 ~ +85 °C
Operating Humidity 20 ~ 80% RH, Non-condensing
Storage Humidity 10 ~ 90% RH, Non-condensing
Mechanical
Dimensions 110 mm X 107 mm
 
DN-8237UB (parts with suffix "B" support electromagnetic brake output)
CA-26-MJ3-15/30/50(B) 26-pin HD D-Sub Male cable for Mitsubishi servo amplifier, 1.5/3/5 M (for MELSERVO-J3/J4/JE series)
CA-26-YSV-15/30/50(B) 26-pin HD D-Sub Male cable for Yaskawa servo amplifier, 1.5/3/5 M (for Sigma II/III/V/7 series)
CA-26-PA4-15/30/50(B) 26-pin HD D-Sub Male cable for Panasonic servo amplifier, 1.5/3/5 M (for MINAS A4/A5/A6 series)
CA-26-DAA2-15/30/50(B) 26-pin HD D-Sub Male cable for Delta A2 servo amplifier, 1.5/3/5 M (for ASDA-A2 series)
CA-26-DAB2-15/30/50(B) 26-pin HD D-Sub Male cable for Delta B2 servo amplifier, 1.5/3/5 M (for ASDA-B2 series)
CA-26-FFW-15/30/50 26-pin HD D-Sub Male cable for Fuji servo amplifier, 1.5/3/5 M (for FALDIC-W and ALPHA5 Smart series)
CA-26-TTA-15/30/50 26-pin HD D-Sub Male cable for Teco servo amplifier, 1.5/3/5 M (for TSTA-A/A+ series)
DN-8237DB
CA-SCSI50-D1/3/5 SCSI-II 50-pin & 50-pin Male connector cable 1/3/5 M (for ASDA A series)
DN-8237YB & DN-8237PB
CA-SCSI50-PY1/3/5 SCSI-II 50-pin & 50-pin Male connector cable 1/3/5 M (for Panasonic & Yaskawa series motor)
 
TOP | HOME
 

取得 Adobe Flash Player