FSM-510G-4F
6-Port 10/100/1000 Base-T + 4 SFP Port L2 Managed Switch
FSM-510G-2F 8-port 10/100/1000Base-T + 2 (100/1G) SFP L2 Plus Managed Switch |
|
|
~ NEW ~ |
|
 |
 |
Model: FSM-510G-4F |
Model: FSM-510G-2F |
|
|
 |
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- L2+ features provide better manageability, security, QoS, and performance
- Network redundant Ring fail-over protection (< 20 ms)
- Multicasting support IGMP v1/v2/v3, proxy & snooping
- Multicast/Broadcast/Flooding Storm Control
|
|
|
|
|
 |
FSM-510G-4F is a L2 Managed Switch that meets all IEEE 802.3ab/u/x/z Gigabit, Gigabit Ethernet and Ethernet specifications. It provides 6 gigabit Ethernet ports (10/100/1000 Mbps TP) 4 SFP ports.
The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-Based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON . |
|
 |
Models |
FSM-510G-4F |
FSM-510G-2F |
Technology |
Standards |
Port Mirroring helps supervisor monitoring network |
IEEE 802.1Q tag-based VLAN for performance |
IEEE 802.1X Access Control improve network security |
IEEE 802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree |
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) |
IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 |
Unknown Unicast/Broadcast/Multicast storm control |
IP-MAC-Port binding for LAN security |
QCL Based on Application traffic for QoS and rate limitation management |
Supports DHCP snooping |
ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy |
Supports "power saving" for Green Ethernet requirement |
Supports LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves. |
MAC Addresses |
8 K |
Processing Type |
Store & forward |
Protocol |
VLAN, QoS, Port Trunk, NTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP |
Interface |
RJ-45 Ports |
6-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
8-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
SFP |
4-port 100/1000 Mbps SFP Fiber Module slots |
2-port 100/1000 Mbps SFP Fiber Module slots |
LED Indicators |
POWER, ALARM , TP Port LED |
Ethernet Isolation |
1500 VRMS 1 minute |
Serial Port |
RS-232 (TxD, RxD and GND); Non-isolated |
Power |
Input Voltage Range |
+12 VDC ~ +48 VDC |
Power Consumption |
10.5 W |
Frame Ground for EMS Protection |
Yes |
Mechanical |
Casing |
Metal |
Environmental Rating |
IP30 |
Dimensions (W x L x H) |
60 mm x 109 mm x x 154 mm |
Installation |
DIN-Rail mounting, Wall mounting |
Environment |
Operating Temperature |
-40 °C ~ +75 °C |
Storage Temperature |
-40 °C ~ +85 °C |
Ambient Relative Humidity |
5 ~ 95% RH, non-condensing |
|
|
 |
FSM-510G-4F |
6-Port 10/100/1000 Base-T + 4 SFP (100/1G) Port L2 Plus Managed Switch |
FSM-510G-2F |
8-port 10/100/1000Base-T + 2 (100/1G) SFP L2 Plus Managed Switch |
|
|
 |
SFP-1G85M-SX |
Multi-mode 850 nm, 0.5 km SFP module |
|
SFP-1G13M-SX2 |
Multi-mode 1310 nm, 2 km SFP module |
SFP-1G13S-LX |
Single-mode 1310 nm, 10 km SFP module |
SFP-1G13S-LX20 |
Single-mode 1310 nm, 20 km SFP module |
SFP-1G13S-LHX |
Single-mode 1310 nm, 40 km SFP module |
SFP-1G15S-XD |
Single-mode 1550 nm, 60 km SFP module |
|
|
|
|
|
|
|