home > product> solutions > industrial communication> Fieldbus > EtherNet/IP
 
EtherNet/IP FAQs
 
GW-7472
GW-7473
EIP-2000
 
 
     
  GW-7472  
   

  1. Could you please confirm that GW-7472 works with SLC-500(SLC5/05) without any problems?
  2. In some case, the byte order of the AI/AO word data in the communication is reversed, i.e. low byte is MSB and high byte is LSB. Is there a byte swapping function?
  3. How to make a Class1 connection with the GW-7472 Utility Diagnostic window?
  4. Why did the pop-up message "FW Version Error" be shown after I run the new version Utility?
  5. How to connect to the Allen-Bradley PLC？
  6. How to check the connections between the GW-7472 and the Modbus devices？
  7. How can I check the wire connections？
  8. How to set up the GW-7472 for Modbus TCP？
  9. How to set up GW-7472 in RSLogix 5000 MSG ladder element？
  10. What is the difference between Utility V2.2.0 and the older version？
  11. How should I do when the impedance matching problem occured?
  12. I can not find my GW-7472 when I click Network Scan button?
  13. I don't want to establish the Modbus connection before I connect to GW-7472 with EtheNet/IP. What should I do?
  14. We make a wrong setting in the GW-7472, how do I set the GW-7472 to factory default?
  15. When I update the firmware, the update status is always 0%. What should I do?

  1. GW-7472 能否與SLC-500 通訊?
  2. 在某些特定的情況，AI/AO 的byte 擺放位置是相反的，也就是MSB 及LSB 的差別，GW-7472 是否有MSB/LSB 功能切換?
  3. 如何使用GW-7472 Utility 中的Diagnostic 視窗建立Class 1 連線測試?
  4. 當我運行新版本調試工具的時候，軟體會跳出警告視窗FW version Error，該如何排除警告視窗?
  5. 如何連接到Allen-Bradley PLC？
  6. 如何確認GW-7472 與Modbus 設備間的連線？
  7. 我該如何確認串列阜接線？
  8. 如何去設定GW-7472 模組的Modbus TCP/IP？
  9. 如何在RSLogix 5000 MSG ladder element 設定GW-7472 連線？
  10. 新版本調試工具v2.2.0 與先前的版本有何不同?
  11. 透過RS-485 進行Modbus RTU 通訊的時候遇到阻抗不匹配該怎麼辦?
  12. 如何解決調試工具掃描鈕無法掃描到模組的問題?
  13. 如何在EtherNet/IP 連線前停止Modbus 收送?
  14. 對GW-7472進行了錯誤的設置，該如何還原為原廠預設值??
  15. 在更新畫面中一直停在0%，該如何解決這個問題?
  
     
  GW-7473  
   

  1. What should I do when I forget the Network Settings of GW-7473?
  2. How to get the connection status of Adapters?
  3. What kind of devices can be connected with GW-7473?
  
     
  EIP-2000  
   

  1. How to connect to the Allen-Bradley PLC？
  2. How to use EDS file of EIP-2000 series？
  3. When I click the "Network Scan" button, and it pop-up a "Can not find any module" window. What should I do?
  4. The AI status we get from the EIP-2017/EIP-2019 is different with the real AI value. How do I solve this problem?
  5. If I forget the IP address of the EIP-2000 modules, how do I search them?
  6. I can't update the firmware with the Utility, how should I do?
  1. 如何與 Allen-Bradley PLC建立連線？
  2. 如何使用EIP-2000系列產品的EDS檔？
  3. 當我按下"Network Scan" 鈕時，調試工具跳出" Can not find any module"，我該如何處置這種情況?
  4. EIP-2017/EIP-2019量測值與實際輸入的數值不同，該如何解決？
  5. 如果遺忘了EIP-2000模組的網路設置，該如何解決?
  6. 更新韌體時失敗了，該如何解決?
  

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player