~NEW~
 
~Available soon~
 
Model: NS-209F Series Model: NSM-209F Series
NS-209F/NSM-209F Series
Unmanaged 8-Port Industrial 10/100 Base-TX with 100 Base-FX Fiber Switch
 
         
     
 
 
 
The NS-209F/NSM-209F series is a Unmanaged 8-Port Industrial 10/100 Base-TX with 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 30 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.
The NS-209F/NSM-209F series operates at full duplex mode. In full duplex mode, range is 30 Km with 8.3/125, 8.7/125, 9/125 or 10/125 £gm fiber cables. The Ethernet supports 10/100M auto negotiation feature and auto MDI/MDI-X function. NSM-209F provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-209F's power needs.
 
   
     
 
 
 
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 2 Gbps high performance memory bandwidth MAC addresses
  • Integrated look-up engine with dedicated 2048 unicast MAC addresses
  • Power Input, +12 ~ +48 VDC
  • Operating Temperatures, 0 ¢XC ~ +70 ¢XC
  • DIN-Rail for NS-209F series
  • DIN-Rail or Wall Mounting for NSM-209F series
 
   
     
 
 
 
Models NS-209F Series NSM-209F Series
Technology
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Optics Port 100 Base-FX
LED Indicators 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet Isolation 1500 Vrms 1 minute
Frame Ground for EMS Protection Yes
Multi Mode
(NS-209FT/NS-209FC/NSM-209FT/
NSM-209FC)
Multi Mode Fiber Cables: 50/125, 62.5/125 or 100/140 £gm
Distance: 2 Km, (62.5/125 £gm recommended) for full duplex
Wavelength: 1300 or 1310 nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
RX Sensitivity: -32 dBm
Single Mode
(NS-209FCS/NSM-209FCS)
Single Mode Fiber Cables: 8.3/125, 8.7/125, 9/125 or 10/125 £gm
Distance: 30 Km, (9/125 £gm recommended) for full duplex
Wavelength: 1300 or 1310 nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
RX Sensitivity: -34 dBm
Ethernet Transmission distance Ethernet: 2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 £[
Fast Ethernet: 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 £[
Power
Input Voltage Range +12 ~ +48 VDC (Non-isolated) +12 ~ +48 VDC (Non-isolated)
Redundant Inputs with one relay
output (1 A @ 24 VDC) for alarm
Power Consumption 0.26 A @ 24 VDC
LED Indicator Yes
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP20 Protection)
Dimensions (W x L x H) 64 mm x 101 mm x 118 mm 73 mm x 105 mm x 132 mm
Installation DIN-Rail DIN-Rail or Wall Mounting
Environmental
Operating Temperature 0 ¢XC ~ +70 ¢XC
Storage Temperature -20 ¢XC ~ +85 ¢XC
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
 
   
     
 
 
 
   NS-209FT CR    Multi-mode, ST Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch (RoHS)
   NS-209FC CR    Multi-mode, SC Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch (RoHS)
   NS-209FCS CR    Single-mode 30 Km, SC Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch (RoHS)
   NSM-209FT CR    Multi-mode, ST Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch; metal case (RoHS)
   NSM-209FC CR    Multi-mode, SC Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch; metal case (RoHS)
   NSM-209FCS CR    Single-mode 30 Km, SC Connector, 8-Port 10/100 Mbps with 1 Fiber port Switch; metal case (RoHS)
 
   
     
 
 
 
GPSU06U-6 CR    24V/0.25A, 6 W Power Supply (RoHS)
KWM020-1824F CR    24V/0.75A, 18 W Power Supply (RoHS)
DIN-KA52F CR    24V/1.04A, 25 W Power Supply with DIN-Rail Mounting (RoHS)
MDR-20-24 CR    24V/1A, 24 W Power Supply with DIN-Rail Mounting (RoHS)
MDR-60-24 CR    24V/2.5A, 60 W Power Supply with DIN-Rail Mounting (RoHS)
 
   
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved