|
|
|
|
~NEW~ |
|
|
|
|
|
|
 |
|
|
| |
|
|
| |
I-87024DW is a serial interface and 4-channel analog output module. The programmable analog outputs are 14-bit resolution and offer 0~5V, +/-5V, 0~10V, +/-10V, 0~20mA, and 4~20mA. |
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
- 4-channel Analog Output
- D-Sub 37 Connector
- 4 kV ESD Protection
- Dual Watchdog
- Power On Value Setting
- Safe Value Setting
- 3000 VDC Intra-Module Isolation, Field to Logic
- A Wide Range of Operating Temperature: -25 ¢XC~ 75 ¢XC
- RoHS Compliance
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis, Testing Equipment. |
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
| Analog Output |
| Output Channels |
4 |
| Output Type |
0 ~ +5 V, +/-5 V, 0 ~ +10 V, +/-10 V, 0 ~ +20 mA, +4 ~ +20 mA |
| Resolution |
14-bit |
| Accuracy |
+/- 0.1% of FSR |
| Zero Drift |
Voltage: +/-30 £gV/ ¢XC |
| Current: +/-0.2 £gA/ ¢XC |
| Span Drift |
+/- 20 ppm/¢XC |
| DA Output Response Time |
10 ms per channel |
| Programmable Output Slope |
0.125 to 2048 mA/second |
| 0.0625 to 1024 V/second |
| Voltage Output Capability |
10 V@20 mA |
| Current Load Resistance |
External +24 V : 1050 ohms |
| Power-Up and Safe Value |
Yes |
| Open Wire Detection |
Yes |
| ESD Protection |
4 kV Contact for each terminal. |
| Intra-module Isolation, Field to Logic |
3000 VDC |
| LED Display |
| 1 LED as Power/Communication Indicator |
| Power |
| Power Consumption |
Typical : 1.3 W |
| Maximum : 3.1W (4 Channels output 20mA at 10V) |
| Environment |
| Operating Temperature |
-25 ~ +75 ¢XC |
| Storage Temperature |
-30 ~ +75 ¢XC |
| Humidity |
5 ~ 95% RH, non-condensing |
| Dimensions |
| 30 mm x 102 mm x 115 mm(W x L x H) Detail |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
| I-87024DW-G CR |
4-channel 14-bit analog output module (Gray Cover) (RoHS) |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
| DN-37-A |
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:5.08mm) |
| DN-37-381-A |
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:3.81mm) |
| CA-3705A |
Male-Female D-sub cable 0.5 M |
| CA-3710A |
Male-Female D-sub cable 1 M |
| CA-3715A |
Male-Female D-sub cable 1.5 M |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
