CAN Bus
    I-7188XBD-CAN
 
 
 
 
    CAN Bus
 
 
    I-7188 Series
 
     
     
     
     

 
 
I-7188XBD-CAN
I-7188 CAN bus series Programmable Automation Controller
 
 
 

~ NEW ~
 
 
The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to
 
 
match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient solution for diversification CAN application.
 
     
 
  Applications
 
     
• CAN bus communication application • Industry automation • Auto defection CANopen slave devices
• IO monitor • High speed data acquisition system • Process monitor and control • Factory automation
• Laboratory automation •Communication switching
 
  Features
 
  • 2500Vrms photo-isolation protection.
  • Compatible with CAN specification 2.0 parts A and B.
  • Programmable transfer rate up to 1 Mbps.
  • Jumper select 120Ω terminator resistor for CAN channel
  • 64-bit hardware unique serial number inside
  • COM driver support interrupt & 1K QUEUE input buffer
  • COM port: COM1, COM2
  • Built-in RTC, NVRAM, EEPROM
  • One digital Input channel and one open collector output channel
  • Built-in self-tuner ASIC controller on RS-485 port
  • 7-segment LED display
  • Built-in ICP DAS’s MiniOS7
  • Program download port: COM1
  •  
     
      Hardware Specifications
     
         
     
    Model  
    I-7188XBD-CAN
     CPU
    Am188TMES: 40M Hz or compatible
     Flash  
    512K bytes, Erase unit is one sector (64K bytes); 100,000 erase/write cycles
     SRAM
        512K bytes    
     EERROM
    2048 bytes (8 blocks, each block has 256 bytes); Data retention > 100 years; 1,000,000 erase/write cycles.
     NVSRAM
    31 bytes, battery backup, data valid up to 10 years
     Real Time Clock
    Year-2000 compliance; seconds, minutes, hours, date of the month, year, valid up from 1980 to 2079
    CAN Signal Support
    CAN_H, CAN_L
    Connecter
    5-pin screw terminal connecter
    DI Level: Dry Contact
    Logical level 0: closed to GND / Logical level 1: open
    DI Level: Wet Contact
    Logical level 0: +1V / Logical level 1: +3.5V to +30V
    DO Level
    Open collector to 30V Max. / Output current: 100mA
    Power Consumption
    4W
     COM1
    RS-485: D1+, D1-, self-tuner ASIC inside
     COM2
    RS-485: D2+, D2-, Self-tuner inside
    RS-232: TXD, RXD, RTS, CTS, GND
     Communication Speed
    115200 max
     CAN Controller
    Phillip SJA1000T CAN Controller
     CAN Transceiver
    Phillip 82C250 CAN Transceiver
     LED Directors
    NS, MS, IO
    Display
    7-segment LED: 5digit
    Clock Frequency
    16MHz
    Transmission Speed
    1MBPS Max.
     Isolated
    2500Vrms on CAN side
     Operating Temp
    -25C to 75C
     Storage Temp
    -30C to 85C
     Humidity
    5 ~ 95%
    Dimensions
    122 mm x 72 mm x 33 mm

    AD Specifications

  • Analog input range : ±1.25V
  • Channels : Differential input
  • Resolution : 12-bit
  • Conversion rate: 50KS/s max.
  • Input impedance : 2 M Ohm
  • A/D trigger mode: pacer Trigger
  • A/D data transfer mode: polling, interrupt
  • Over voltage protection : ±220V
  • Linearity : ± 2-bit

    DI Specifications

  • Logical level 1: +3.5V to +30V(only for DI0)
  • Input high range: 5~30V(only for DI1~DI2)
  • Input low range: 0~1V

    DO Specifications

  • Open-collector Output: 100 mA / channel
  • Load Voltage: 5Vdc to 30Vdc
  • Load Current: 100mA (maximum)
  • Isolation Voltage: 3750Vrms (only for DO1~DO4)
  •      
       
     
      Ordering Information
     
         
    I-7188XBD-CAN
    Programmable automatic controller with two series communication port (RS-232/RS-485), one CAN port, seven segment Display, developing tool kit 512k flash ,512k SRAM, Minios7, 1 DI and 1 DO channels
    I-7188XBD-CAN CR
    Programmable automatic controller with two series communication port (RS-232/RS-485), one CAN port, seven segment Display, developing tool kit 512k flash ,512k SRAM, Minios7, 1 DI and 1 DO channels (RoHS)
     
       
    Copyright© ICP DAS Co., Ltd. All Rights Reserved