£gPAC-7186EXD-CAN series programmable automation controller
Introduction

        £gPAC-7186EXD-CAN is one of CAN bus series PAC (Programmable Automation Controller) of ICP DAS. It is powered by 80186-80 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port, RS-485 port and Ethernet interface. Users can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. It is applied for the complex communication interface applications and could be useful to do the data exchange from differential communication interfaces. Besides, it has over voltage protection and high-resolution data acquisition. Therefore, the £gPAC-7186EXD-CAN PAC is an economic and convenient solution for diversified CAN applications.
 
Features¡G
¡E Support one ISO-11898-2 CAN port
¡E 1000Vdc voltage protection on CAN side
¡E Compatible with CAN specification 2.0 parts A and B
¡E CAN port programmable transfer rate up to 1 Mbps
¡E Jumper-selected 120£[ terminal resistance for CAN channel
¡E Support one Ethernet port
¡E 10/100 BASE-T NE2000 compatible Ethernet Controller
¡E Support a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
¡E COM port : COM1 (RS-232 port) and COM2(RS-485 port)
¡E COM drivers support interrupt & 1K QUEUE Input & Output buffer
¡E Built-in self-tuner ASIC controller on RS-485 port
¡E Program download port : COM1
¡E 64-bit hardware unique serial number inside
¡E Built-in RTC, NVRAM, EEPROM
¡E 7-segment LED display
¡E 4 controllable LED
¡E Built-in ICP DAS¡¦s MiniOS7
 
For more detail information, please refer to the following web site.
http://www.icpdas.com/products/Remote_IO/can_bus/upac-7186ecan.htm
   
Copyright©1983-2004 ICP DAS Co., Ltd. All Rights Reserved