iSN-701X

Vibration signal to Modbus slave converter
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X
iSN-701X

Features

  • 1-axis IEPE vibration measurement
  • Suitable for high frequency vibration measurement
  • LED indicators for sensor Normal/Open/Short
  • Support Modbus TCP/RTU slave protocol
  • Data Format:
  - Acceleration: RMS, Maximum, P-P
  - Velocity: RMS
  - Displacement: P-P
  - Crest Factor
  - Top 20 spectrum values(Magnitude/Frequency)
  • Vibration eigenvalues threshold alarm function
CE UKCA RoHS WEEE

Introduction

The iSN-701X series module is a vibration signal converter with Ethernet and RS-485 communication interface. It has a built-in 4 mA excitation current to power the integrated electronic piezoelectric (IEPE) accelerometers and 24-bit A/D Converter. The iSN-701X series module converts the vibration signal into a variety of eigenvalues and provides a vibration eigenvalues threshold alarm function that sends an alarm when the eigenvalue exceeds the threshold value. Users can obtain the eigenvalues through the Modbus TCP/Modbus RTU. The iSN-701X series module is recommended as your best choice for vibration monitoring and measurement.

Applications

  • Big data analysis
  • System monitoring
  • Trend analysis
  • Predictive maintenance

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES iSN-701X     CR DESCRIPTIONModbus TCP/RTU, Vibration signal to Modbus slave converter, 1 channel (RoHS)
This combination include other products.

Similar Products

LED Indicators
Status 1 X PWR
1 X IEPE
1 X DAQ
Analog Input
Channels 1
Type IEPE
Range ±10 V
Resolution 24 bit
Sampling Rate 32, 64 (kHz)
Bandwidth 6 Hz ~ 6.4 kHz
Excitation Current 4 mA
Analog Output
Type Voltage x 1
Range Voltage: ±10 V
Ethernet
Ports 1 x RJ-45, 10/100Base-T(X)
Protocol Modbus TCP
COM Ports
Ports 1 x RS-485
Baud Rate 115200 bps Max.
Protocol Modbus RTU
Power
Input Range +10 ~ +30 VDC
Consumption 2.5 W
Mechanical
Dimensions (mm) 25 mm x 120 mm x 117 mm (W x L x H)
Installation Din-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ 80 °C
Humidity 10 ~ 90% RH, non-condensing