USB I/O
ICP DAS USB series I/O modules are highly fl exible solution to acquire or output data. User can build up own PC-based control, laboratory research, testing and so on by applying ICP DAS USB series I/O modules. The advantages of ICP DAS USB I/O modules are small size, portable, plug & play and various input type to help user build up own project easily and quickly in different fi eld and application. These I/O modules can be applied in wide range application, ex: fan-less control or measurement, automatically testing systems…etc. ICP DAS provides two kinds of USB series I/O as below.
1. USB-2000 I/O Modules:
It provides 10kS/s data acquisition functionality and powered by USB port. User can apply this to real-time demanded application, ex: vibration current measurement.2. USB-87Pn I/O Expansion Unit:
The brief comparison is as the following table:
| Model Name | USB-2000 | USB-4000 | USB-87Pn |
|---|---|---|---|
| Pictures |  |
 |
 |
| USB Connector | USB type B | Micro USB | USB type B |
| Protocol | USB HID | Modbus RTU | DCON (ASCII Format) |
| Driver | No needed. | VxComm for Windows 10 (Virtual COM port) |
VxComm for Windows, Linux (Virtual COM port) |
| Power Supply | USB port | USB port | External power supply, +10 ~ +30 VDC via wiring |
| Sd | 12 Mbit/s (USB 2.0 Full-Speed) | 12 Mbit/s (USB 2.0 Full-Speed) | 115200 bit/s (default) |
| Slot for I/O Unit | - | - | 1/2/4/8 |
| Dimensions (W x L x H) (Units: mm) |
33 x 78 x 107 31 x 129 x 147 |
113 x 169 x 29 113 x 169 x 54 |
64 x 120 x 110 (Min.) 312 x 132 x 111 (Max.) |
| SDK and Sample | VB, C++, C#.Net, VB.Net, Linux driver | N/A | Dll, Labview, InduSoft, Linux, OPC server |
Features:
-
USB bus powered - Plug and Play
-
Dual Watchdog - Hardware and Communication WDT
-
Power On Value & Safe Value - When output module power-on, reset, or communication timeout
-
Highly Reliable Under Harsh Environment - From -25 to 75°C
USB-2000 I/O modules
ICP DAS USB series I/O modules are highly flexible solution to acquire or output data. User can build up own PC-based control, laboratory research, testing and so on by applying ICP DAS USB series modules. The advantages of ICP DAS USB I/O modules are small size, portable, USB bus powered and various input type to help user build up own project easily and quickly in different field and application.
Compare with traditional PC I/O card, it is waste of time to open chassis and configure I/O board. In ICP DAS USB I/O, you will enjoy the simply controlling I/O in the efficient way. ICP DAS USB I/O equips USB bus powered feature, one cable to access I/O and provide power without additional power wiring. ICP DAS USB I/O is a small size module. You can apply these I/O modules in wide range application, ex: fan-less control or measurement, automatically testing with BOX-PC…etc. ICP DAS USB I/O provides 10kS/s data acquisition functionality. User can apply this to real-time demanded application, ex: noise measurement.
Applications
Automatic control, Automatic testing and Laboratory research
Features
USB bus powered
The ICP DAS USB I/O series module can be powered by PC. Both data and power can be carried through an USB cable eliminating the need for additional wiring and power supply.
Dual Watchdog
The Dual Watchdog is consists of a Module Watchdog and a Communication Watchdog. The action of output is also associated to the Communication Watchdog.
Module Watchdog is a built-in hardware circuit to monitor the operation of the module and will reset the CPU if a failure occurs in the hardware or the software.
Communication Watchdog is a software function to monitor the communication between the host and the ICP DAS USB I/O module. The timeout of the communication Watchdog is programmable, when the ICP DAS USB I/O doesn't receive commands from the host for a while. The watchdog forces the output to Pre-Programmed Safe Value to prevent unpredictable damage of the connected devices.
Power On Value & Safe Value
Besides setting value to output modules, the output modules can be set under two other conditions.
Power On Value: The Power On Value is loaded into the output modules under 3 conditions: power on, reset by Module Watchdog, reset by reset command.
Safe Value: When the Communication Watchdog is enabled and a Communication Watchdog timeout occurs, the "Safe Value" is loaded into the output modules.
Highly Reliable Under Harsh Environment
- Operating Temperature: -25 ~ +75 °C
- Storage Temperature: -40 ~ +85 °C
- Humidity 10 ~ 90% RH (non-condensing)
|
|
||||||||||
|
Analog I/O
|
||||||||||
| Model | AI | AO | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Channel | Resolution | Input Type | Sampling Rate | Channel | Resolution | Output Type | ||||
| USB-2019/S
|
8 | 16-bit | 15 mV, 50 mV, 100 mV, 150 mV, 500 mV, 1 V, 5 V, 10 V, 20 mA, 0~20 mA, 4~20 mA, J, K, T, E, R, S, B, N, C, L, M, LDIN43710 |
10 Hz | - | - | - | |||
|
|
|||||||||||||
|
Multifunction I/O
|
|||||||||||||
| Model | AI | AO | DI | DO | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Channel | Resolution | Sampling Rate | Channel | Resolution | Output Type | Channel | Type | Channel | Type | Rating | |||
| USB-2026
|
5 | 14/12 | 10/200 Hz | 2 | 12 | - | 2 | Dry, Source | 2 | OC, Sink | 700 mA | ||
|
|
||||||
|
Digital I/O
|
||||||
| Model | DI | DO | ||||
|---|---|---|---|---|---|---|
| Channel | Input Type | Channel | Type | Rating | ||
| USB-2045
|
- | - | 16 | Open Collector, Sink | 700 mA/Channel | |
| USB-2045-32
|
32 | 500 mA/Channel | ||||
| USB-2051
|
16 | Dry, Source | - | - | - | |
| Wet, Sink/Source | ||||||
| USB-2051-32
|
32 | Dry, Source | ||||
| Wet, Sink/Source | ||||||
| USB-2055
|
8 | Dry, Source | 8 | Open Collector, Sink | 700 mA/Channel | |
| Wet, Sink/Source | ||||||
| USB-2055-32
|
16 | Dry, Source | 16 | 600 mA/Channel | ||
| Wet, Sink/Source | ||||||
| USB-2060
|
6 | Dry, Source | 6 | Power Relay, Form A (SPST N.O) |
5 A | |
| Wet, Sink/Source | ||||||
| USB-2064
|
- | - | 8 | Form A (SPST N.O.) | ||
| USB-2064-16
|
16 | 3 A | ||||
| USB-2068-18
|
10 | Dry, Source | 8 | Signal Relay, Form C (DPDT) | 2 A @ 30 VDC 0.24 A @ 220 VAC |
|
| Wet, Sink/Source | ||||||
|
|
|||||||
|
Pulse I/O
|
|||||||
| Model | Pulse Input | Pulse Output | |||||
|---|---|---|---|---|---|---|---|
| Channel | Input Type | Isolation | Channel | Resolution | Output Type | ||
| USB-2084
|
4 Up/Down (CW/CCW) 4 Dir/Pulse (Bi-direction) 4 A/B Phase (Quadrant Counting) 8 Up Counter, Frequency |
TTL: 500 KHz Max. Isolated: 250 KHz Max. |
2500 VDC | - | - | - | |
|
|
||||||||||
|
Analog I/O
|
||||||||||
| Model | AI | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Channel | Resolution | Sampling Rate | Input Type | Isolation | ||||||
| USB-4018HS | 8 | 16-bit | 100 Hz (each channel) |
Thermocouple : J, K, T, E, R, S, B, N, C, L, M, LDIN43710 | 3000 VDC | |||||
| USB-4018HS-16 | 16 | |||||||||
Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, LabVIEW driver, InduSoft driver, Linux driver, OPC Server, etc. The I-87K series I/O modules plugged in the USB-87Pn can be easily integrated into variant software system.
|
|
||||||
|
Intelligent USB I/O Expansion Unit
Supported I/O modoules - I-87k series module |
||||||
| Model | USB 2.0 Interface | I/O Expansion Slot | ||||
|---|---|---|---|---|---|---|
| Baud Rate | Communication Protocol | Auto Configuration | Hot Swap | Slot Number | ||
| USB-87P1 | 115200 bps (Default) | DCON Protocol (ASCII Format) | Yes |
Yes
|
1 | |
| USB-87P2 | 2 | |||||
| USB-87P4 | 4 | |||||
| USB-87P8 | 8 | |||||
Please refer to the link below for details: https://www.icpdas.com/en/product/p04.php?root=68&kind=714
