XW507

1-port Non-Isolated RS-422/485, 5-ch Isolated DI and 5-ch Isolated DO Expansion Board

Features

Baud 115200 bps RS-422/485 supports
I/O Expansion
- DI(Wet): 5 Channels
- DO(Sink): 5 Channels

Introduction

XW507 is a RS-422/485 port & DI/O expansion board for use with uPAC-50xx and WP-51xx series controllers. XW507 provides 1 Port Non-isolated RS-485 serial ports and 5-ch Isolated DI(Wet) and 5-ch Isolated DO(Sink) that have 128-byte FIFO buffers and support communication speeds up to 115,200 bps.

The serial communication modules are designed for use with intelligent devices like bar code readers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-422 or RS-485 port.

Applications

Ordering Information

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES XW507 CR	DESCRIPTION1-port Non-Isolated RS-422/485, 5-ch Isolated DI (Wet) and 5-ch Isolated DO (Sink, NPN, 10 ~ 40 VDC) Expansion Board (RoHS)

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

Digital Input
Channels	5
Type	Wet Contact
Sink/Source (NPN/PNP)	Sink/Source
ON Voltage Level	+10 VDC ~ +50 VDC
OFF Voltage Level	+4 VDC Max.
Isolation	3750 Vrms
Input Impedance	10 K Ohm
Overvoltage Protection	60 VDC

Digital Output
Channels	5
Type	Open Collector
Sink/Source (NPN/PNP)	Sink
Load Voltage	+10 VDC ~ 40 VDC
Load Current	200 mA/channel at 25 °C
Overload Protection	1.4 A
Isolation	3750 Vrms

COM Ports
Ports	1x RS-485/RS-422
Baud Rate	115200 bps Max.
Parity	None, Even, Odd, Mark, Space
Data Bit	5, 6, 7, 8
Stop Bit	1, 1.5, 2
FIFO Size	128 bytes

Power
Consumption	0.4 W

Mechanical
Dimensions (mm)	66 mm x 82 mm x 17 mm (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 °C ~ +75 °C
Humidity	10 ~ 95% RH, Non-condensing