WISE-7105

Intelligent I/O Module with 8-ch Thermistor Input, 4-ch DO

Features

Runs on browsers, no extra software tool is required.
No more programming, Web pages provided for control logic editing.
IF-THEN-ELSE logic rules execution ability.
Built-in I/O (AI: 8-channels Thermistor Input; DO: 4-channels).
Support I/O channel monitoring/control, Timer operations.
Support non-SSL Email sending and CGI Command sending operations.
Modbus TCP Protocol for SCADA System Integration.
IEEE 802.3af-compliant Power over Ethernet (PoE).

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7105 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7105 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7105 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel Thermistor inputs and 4-channel digital outputs. Each analog channel is allowed to configure an individual range.

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

More detailed application case, you can find on here.

Ordering Information

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES WISE-7105 CR	DESCRIPTIONIntelligent I/O Module with 8-ch Thermistor Input, 4-ch DO and PoE (RoHS)

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

Software
Protocol	• Modbus TCP • CGI Command (Sending)
Function	• Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function

CPU Module
CPU	16-bit CPU (80 MHz)

Isolation
Intra-module Isolation	2500 VDC

EMS Protection
EFT (IEC 61000-4-4)	±4 kV for Power Line
ESD (IEC 61000-4-2)	±4 kV Contact for each terminal and ±8 kV Air for random point

LED Indicators
Status	1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed

Analog Input
Channels	8 (Differential)
Type	Thermistor (Precon ST-A3, Fenwell U, YSI L100, YSI L300,YSI L1000, YSI B2252, YSI B3000, YSI B5000,YSI B6000, YSI B10000, YSI H10000,YSI H30000)
Resolution	16-bit
Accuracy	±0.1% or better
Sampling Rate	10 Sample/Sec. (Total)
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Overvoltage Protection	110 VDC/VAC
Individual Channel Configuration	Yes
Open Wire Detection	Yes
Zero Drift	±20 μV/°C
Span Drift	±25 ppm/°C

Digital Output
Channels	4
Type	Isolated Open Collector
Sink/Source (NPN/PNP)	Sink
Load Voltage	+5 VDC ~ +50 VDC
Load Current	700 mA/Channel
Overvoltage Protection	60 VDC
Overload Protection	1.4 A
Short-circuit Protection	Yes

Ethernet
Ports	RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X
PoE	Yes

Power
Reverse Polarity Protection	Yes
Input Range	12 ~ 48 VDC
Consumption	3.0 W
Powered from PoE	Yes, IEEE 802.3af, Class 1
Powered from Terminal Block	Yes, 12 ~ 48 VDC