WDR-60-24
Power Supply, 180~550 VAC to 24 VDC/2.5 A, 60 W, DIN-rail mounting
Features
- 180 ~ 550 VAC ultra-wide input for 1-phase or 2-phase
- 32mm slim width
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- 4.7 KVac I/O high isolation (reinforced isolation)
- Cooling by free air convection
- Ultra-wide operating temperature: -30 ~ +85 °C (>+60 °C derating)
- Over voltage category III
- DC OK relay contact
- DC output voltage adjustable (+20%)
Introduction
WDR-60-24 is a 60 W DIN rail power supply with ultra-wide AC input range. It is suitable to be mounted on TS-35/7.5 or TS-35/15 rails. Main features are as following: it can accept 180 ~ 550 Vac ultra-wide input voltage range for single phase or 2-phase system, easy to install DIN rail type, narrow width (32mm) in slim design, -30 ~ +85 °C wide range operating temp, 4.7 KVAC high isolation voltage, operation at 2000m altitude, adjustable output voltage (+20% max.), high efficiency, low ripple & noise, complete protections and so on. WDR-60-24 is compliant with BS EN/EN-61000-6-2 standard regarding immunity for industrial environments.
Applications
industrial automation, surveillance, telecommunication and more applications
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| Safety | |
|---|---|
| Standard | UL61010 approved, EN61558-2-16, EAC TP TC 004 approved; design refer GL and EN60204-1(By request) |
| EMC | |
|---|---|
| Standard | Compliance to EN55011, EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2 Class A, EN61000-3-3 EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN55035, EN61000-6-2, EN61204-3, heavy industry level, criteria A |
| Input | |
|---|---|
| Voltage Range | 180 ~ 550 VAC 254 ~ 780 VDC |
| Frequency Range | 47 ~ 63 Hz |
| Inrush Current (Typ.) | COLD START 30 A/230 VAC 50 A/400 VAC |
| Leakage Current | <2 mA / 530 VAC |
| Output | |
|---|---|
| Ripple & Noise (Max.) | 150mVp-p |
| Voltage Adj. Range | 31 ~ 37 V |
| Voltage Tolerance | ±1.0% |
| Linearity | ±0.5% |
| Load Regulation | ±0.5% |
| Setup, Rise Time | 1000ms, 70ms, 20ms/400 VAC 2000ms, 70ms, 10ms/230 VAC at full load |
| DC Voltage | 24 V |
| Rated Power | 60 W |
| Rated Current | 2.5 A |
| Efficiency | 89% |
| Protection | |
|---|---|
| Over Voltage | 31 ~ 37V Protection type : Shut down o/p voltage, re-power on to recover |
| Overload | 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| Function | |
|---|---|
| DC OK Active Signal (Max.) | 30V/1A resistive |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) | (32 * 125.2 * 102) mm |
| Environment | |
|---|---|
| Operating Temperature | -30 ~ +85°C |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 20 ~ 90% RH non-condensing |
