NSM-206PFCS
4-port 10/100 Mbps PoE(PSE)Ethernet Switch with 2 fiber ports (Single-mode, SC Connector)、Power Supply Input +12 VDC ~ +57 VDC
Features
• 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
• Power input 12~57 VDC wide range redundant power inputs
• Single-mode, SC Connector Fiber supports
• Broadcast Storm protection
Introduction
The NSM-206PFCS is 6-port unmanaged Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-206PFCS enable centralization of the power supply, providing up to 30 watts. The NSM-206PFCS can be used to power IEEE 802.3af/at standard devices (PD).
Applications
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| LED Indicators | |
|---|---|
| Status | PWR1, PWR2, POE, Link/Act, Speed |
| Ethernet | |
|---|---|
| Ports | 4 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward; wire speed switching |
| MAC Table | 2048 |
| Frame Buffer Memory | 768 Kbit |
| Isolation | 1500 Vrms 1 minute |
| DIP Switch | Broadcast Storm protection |
| PoE Technology | |
|---|---|
| PoE Compliance | 100% IEEE 802.3at compliant |
| PoE Power | Up to 30 watts per channel |
| PoE Operation | Automatic detection and power management |
| PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
| PoE Disconnect Mode | DC disconnect |
| PoE Voltage | +52 VDC |
| Fiber | |
|---|---|
| Ports | 2 Port 100 Base-FX SC connector |
| Mode | Single-Mode |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance | 30 km, (9/125 μm recommended) for full duplex |
| Wavelength | 1300 or 1310nm |
| TX Output | -15 dBm Min. -8 dBm Max. |
| RX Sensitivity | -34 dBm Max. |
| RX Overload | -5 dBm |
| Budget | 19 dBm |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 57 VDC Redundant dual Input |
| Redundant Power Inputs | Yes |
| Consumption | 0.125 A @ 12 VDC without PD loading, 6.2A @ 24VDC with PD full loading (15.4W per ports) 0.15 A @ 24 VDC without PD loading, 5.8A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDC without PD loading, 2.9A @ 48VDC with PD full loading (30W per ports) |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) | DIN-rail mounting: 28 x 160 x 128 (W x L x H) Wall mounting: 28 x 199 x 121 (W x L x H) |
| Installation | DIN-rail mounting or wall mounting (optional) |
| Environment | |
|---|---|
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
