Introduction
The NS-200FCS is an Ethernet (10/100Base-TX) to Fiber Optic (100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function. The NS-200FCS operates at either half or full duplex mode. It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-200FCS is just 32.30 mm, so it can be used where space is important.
Applications
Ordering Information
PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
---|---|---|---|
This combination include other products.
Similar Products
LED Indicators | |
---|---|
Status | PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
Ethernet | |
---|---|
Ports | 1 x RJ-45, 10/100Base-TX |
Standards | IEEE802.3, 802.3u, 802.3x |
Processing Type | Store & forward wire speed switching |
MAC Table | 1024 |
Memory Bandwidth | 1.4 Gbps |
Isolation | 1500 Vrms 1 minute |
Fiber | |
---|---|
Ports | 1 x 100 Base-FX, SC connector |
Mode | Single-Mode |
Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125μm |
Distance | 15 km, (9/125 μm recommended) for full duplex |
Wavelength | 1300 or 1310nm |
TX Output | -15 dBm Min. -8 dBm Max. |
RX Sensitivity | -36 to -31 dBm |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | +10 ~ +30 VDC (Non-isolation) |
Consumption | 0.12 A@24 VDC, +/- 5% arrowed with 100M Full duplex |
Mechanical | |
---|---|
Casing | Plastic |
Dimensions (mm) | 33 x 85 x 107 (W x L x H) |
Installation | DIN-Rail Mounting |
Environment | |
---|---|
Operating Temperature | 0 °C ~ +70 °C |
Storage Temperature | -20 °C ~ +85 °C |
Humidity | 10% ~ 90% RH, non-condensing |